ThreadPoolOptionProto.Builder

classe final estática pública ThreadPoolOptionProto.Builder

Tipo de protobuf tensorflow.ThreadPoolOptionProto

Métodos Públicos

ThreadPoolOptionProto.Builder
addRepeatedField (campo com.google.protobuf.Descriptors.FieldDescriptor, valor do objeto)
ThreadPoolOptionProto
ThreadPoolOptionProto
ThreadPoolOptionProto.Builder
claro ()
ThreadPoolOptionProto.Builder
clearField (campo com.google.protobuf.Descriptors.FieldDescriptor)
ThreadPoolOptionProto.Builder
limparGlobalName ()
 The global name of the threadpool.
ThreadPoolOptionProto.Builder
limparNumThreads ()
 The number of threads in the pool.
ThreadPoolOptionProto.Builder
clearOneof (com.google.protobuf.Descriptors.OneofDescriptor umof)
ThreadPoolOptionProto.Builder
clonar ()
ThreadPoolOptionProto
final estático com.google.protobuf.Descriptors.Descriptor
com.google.protobuf.Descriptors.Descriptor
Corda
getGlobalName ()
 The global name of the threadpool.
com.google.protobuf.ByteString
getGlobalNameBytes ()
 The global name of the threadpool.
interno
getNumThreads ()
 The number of threads in the pool.
booleano final
ThreadPoolOptionProto.Builder
mergeFrom (entrada com.google.protobuf.CodedInputStream, com.google.protobuf.ExtensionRegistryLite extensionRegistry)
ThreadPoolOptionProto.Builder
mergeFrom (com.google.protobuf.Message outro)
final ThreadPoolOptionProto.Builder
mesclarUnknownFields (com.google.protobuf.UnknownFieldSet desconhecidoFields)
ThreadPoolOptionProto.Builder
setField (campo com.google.protobuf.Descriptors.FieldDescriptor, valor do objeto)
ThreadPoolOptionProto.Builder
setGlobalName (valor da string)
 The global name of the threadpool.
ThreadPoolOptionProto.Builder
setGlobalNameBytes (valor com.google.protobuf.ByteString)
 The global name of the threadpool.
ThreadPoolOptionProto.Builder
setNumThreads (valor interno)
 The number of threads in the pool.
ThreadPoolOptionProto.Builder
setRepeatedField (campo com.google.protobuf.Descriptors.FieldDescriptor, índice int, valor do objeto)
final ThreadPoolOptionProto.Builder
setUnknownFields (com.google.protobuf.UnknownFieldSet desconhecidoFields)

Métodos herdados

Métodos Públicos

public ThreadPoolOptionProto.Builder addRepeatedField (campo com.google.protobuf.Descriptors.FieldDescriptor, valor do objeto)

compilação pública ThreadPoolOptionProto ()

public ThreadPoolOptionProto buildPartial ()

público ThreadPoolOptionProto.Builder claro ()

public ThreadPoolOptionProto.Builder clearField (campo com.google.protobuf.Descriptors.FieldDescriptor)

public ThreadPoolOptionProto.Builder clearGlobalName ()

 The global name of the threadpool.
 If empty, then the threadpool is made and used according to the scope it's
 in - e.g., for a session threadpool, it is used by that session only.
 If non-empty, then:
 - a global threadpool associated with this name is looked
   up or created. This allows, for example, sharing one threadpool across
   many sessions (e.g., like the default behavior, if
   inter_op_parallelism_threads is not configured), but still partitioning
   into a large and small pool.
 - if the threadpool for this global_name already exists, then it is an
   error if the existing pool was created using a different num_threads
   value as is specified on this call.
 - threadpools created this way are never garbage collected.
 
string global_name = 2;

public ThreadPoolOptionProto.Builder clearNumThreads ()

 The number of threads in the pool.
 0 means the system picks a value based on where this option proto is used
 (see the declaration of the specific field for more info).
 
int32 num_threads = 1;

public ThreadPoolOptionProto.Builder clearOneof (com.google.protobuf.Descriptors.OneofDescriptor oneof)

clone público ThreadPoolOptionProto.Builder ()

public ThreadPoolOptionProto getDefaultInstanceForType ()

final estático público com.google.protobuf.Descriptors.Descriptor getDescriptor ()

público com.google.protobuf.Descriptors.Descriptor getDescriptorForType ()

String pública getGlobalName ()

 The global name of the threadpool.
 If empty, then the threadpool is made and used according to the scope it's
 in - e.g., for a session threadpool, it is used by that session only.
 If non-empty, then:
 - a global threadpool associated with this name is looked
   up or created. This allows, for example, sharing one threadpool across
   many sessions (e.g., like the default behavior, if
   inter_op_parallelism_threads is not configured), but still partitioning
   into a large and small pool.
 - if the threadpool for this global_name already exists, then it is an
   error if the existing pool was created using a different num_threads
   value as is specified on this call.
 - threadpools created this way are never garbage collected.
 
string global_name = 2;

público com.google.protobuf.ByteString getGlobalNameBytes ()

 The global name of the threadpool.
 If empty, then the threadpool is made and used according to the scope it's
 in - e.g., for a session threadpool, it is used by that session only.
 If non-empty, then:
 - a global threadpool associated with this name is looked
   up or created. This allows, for example, sharing one threadpool across
   many sessions (e.g., like the default behavior, if
   inter_op_parallelism_threads is not configured), but still partitioning
   into a large and small pool.
 - if the threadpool for this global_name already exists, then it is an
   error if the existing pool was created using a different num_threads
   value as is specified on this call.
 - threadpools created this way are never garbage collected.
 
string global_name = 2;

público int getNumThreads ()

 The number of threads in the pool.
 0 means the system picks a value based on where this option proto is used
 (see the declaration of the specific field for more info).
 
int32 num_threads = 1;

público final booleano isInitialized ()

public ThreadPoolOptionProto.Builder mergeFrom (entrada com.google.protobuf.CodedInputStream, com.google.protobuf.ExtensionRegistryLite extensionRegistry)

Lança
IOException

público ThreadPoolOptionProto.Builder mergeFrom (com.google.protobuf.Message outro)

público final ThreadPoolOptionProto.Builder mergeUnknownFields (com.google.protobuf.UnknownFieldSet desconhecidoFields)

public ThreadPoolOptionProto.Builder setField (campo com.google.protobuf.Descriptors.FieldDescriptor, valor do objeto)

public ThreadPoolOptionProto.Builder setGlobalName (valor de string)

 The global name of the threadpool.
 If empty, then the threadpool is made and used according to the scope it's
 in - e.g., for a session threadpool, it is used by that session only.
 If non-empty, then:
 - a global threadpool associated with this name is looked
   up or created. This allows, for example, sharing one threadpool across
   many sessions (e.g., like the default behavior, if
   inter_op_parallelism_threads is not configured), but still partitioning
   into a large and small pool.
 - if the threadpool for this global_name already exists, then it is an
   error if the existing pool was created using a different num_threads
   value as is specified on this call.
 - threadpools created this way are never garbage collected.
 
string global_name = 2;

público ThreadPoolOptionProto.Builder setGlobalNameBytes (valor com.google.protobuf.ByteString)

 The global name of the threadpool.
 If empty, then the threadpool is made and used according to the scope it's
 in - e.g., for a session threadpool, it is used by that session only.
 If non-empty, then:
 - a global threadpool associated with this name is looked
   up or created. This allows, for example, sharing one threadpool across
   many sessions (e.g., like the default behavior, if
   inter_op_parallelism_threads is not configured), but still partitioning
   into a large and small pool.
 - if the threadpool for this global_name already exists, then it is an
   error if the existing pool was created using a different num_threads
   value as is specified on this call.
 - threadpools created this way are never garbage collected.
 
string global_name = 2;

público ThreadPoolOptionProto.Builder setNumThreads (valor int)

 The number of threads in the pool.
 0 means the system picks a value based on where this option proto is used
 (see the declaration of the specific field for more info).
 
int32 num_threads = 1;

public ThreadPoolOptionProto.Builder setRepeatedField (campo com.google.protobuf.Descriptors.FieldDescriptor, índice int, valor do objeto)

público final ThreadPoolOptionProto.Builder setUnknownFields (com.google.protobuf.UnknownFieldSet desconhecidoFields)