TFRecord and tf.train.Example

The TFRecord format is a simple format for storing a sequence of binary records.

Protocol buffers are a cross-platform, cross-language library for efficient serialization of structured data.

Protocol messages are defined by .proto files, these are often the easiest way to understand a message type.

The tf.train.Example message (or protobuf) is a flexible message type that represents a {"string": value} mapping. It is designed for use with TensorFlow and is used throughout the higher-level APIs such as TFX.

This notebook demonstrates how to create, parse, and use the tf.train.Example message, and then serialize, write, and read tf.train.Example messages to and from .tfrecord files.

Note: While useful, these structures are optional. There is no need to convert existing code to use TFRecords, unless you are using tf.data and reading data is still the bottleneck to training. You can refer to Better performance with the tf.data API for dataset performance tips.

Note: In general, you should shard your data across multiple files so that you can parallelize I/O (within a single host or across multiple hosts). The rule of thumb is to have at least 10 times as many files as there will be hosts reading data. At the same time, each file should be large enough (at least 10 MB+ and ideally 100 MB+) so that you can benefit from I/O prefetching. For example, say you have X GB of data and you plan to train on up to N hosts. Ideally, you should shard the data to ~10*N files, as long as ~X/(10*N) is 10 MB+ (and ideally 100 MB+). If it is less than that, you might need to create fewer shards to trade off parallelism benefits and I/O prefetching benefits.

Setup

import tensorflow as tf

import numpy as np
import IPython.display as display

2024-08-16 07:04:00.479365: E external/local_xla/xla/stream_executor/cuda/cuda_fft.cc:485] Unable to register cuFFT factory: Attempting to register factory for plugin cuFFT when one has already been registered
2024-08-16 07:04:00.500427: E external/local_xla/xla/stream_executor/cuda/cuda_dnn.cc:8454] Unable to register cuDNN factory: Attempting to register factory for plugin cuDNN when one has already been registered
2024-08-16 07:04:00.506819: E external/local_xla/xla/stream_executor/cuda/cuda_blas.cc:1452] Unable to register cuBLAS factory: Attempting to register factory for plugin cuBLAS when one has already been registered

tf.train.Example

Data types for tf.train.Example

Fundamentally, a tf.train.Example is a {"string": tf.train.Feature} mapping.

The tf.train.Feature message type can accept one of the following three types (See the .proto file for reference). Most other generic types can be coerced into one of these:

1. tf.train.BytesList (the following types can be coerced)

   • string
   • byte

2. tf.train.FloatList (the following types can be coerced)

   • float (float32)
   • double (float64)

3. tf.train.Int64List (the following types can be coerced)

   • bool
   • enum
   • int32
   • uint32
   • int64
   • uint64

In order to convert a standard TensorFlow type to a tf.train.Example-compatible tf.train.Feature, you can use the shortcut functions below. Note that each function takes a scalar input value and returns a tf.train.Feature containing one of the three list types above:

# The following functions can be used to convert a value to a type compatible
# with tf.train.Example.

def _bytes_feature(value):
  """Returns a bytes_list from a string / byte."""
  if isinstance(value, type(tf.constant(0))):
    value = value.numpy() # BytesList won't unpack a string from an EagerTensor.
  return tf.train.Feature(bytes_list=tf.train.BytesList(value=[value]))

def _float_feature(value):
  """Returns a float_list from a float / double."""
  return tf.train.Feature(float_list=tf.train.FloatList(value=[value]))

def _int64_feature(value):
  """Returns an int64_list from a bool / enum / int / uint."""
  return tf.train.Feature(int64_list=tf.train.Int64List(value=[value]))

Note: To stay simple, this example only uses scalar inputs. The simplest way to handle non-scalar features is to use tf.io.serialize_tensor to convert tensors to binary-strings. Strings are scalars in TensorFlow. Use tf.io.parse_tensor to convert the binary-string back to a tensor.

Below are some examples of how these functions work. Note the varying input types and the standardized output types. If the input type for a function does not match one of the coercible types stated above, the function will raise an exception (e.g. _int64_feature(1.0) will error out because 1.0 is a float—therefore, it should be used with the _float_feature function instead):

print(_bytes_feature(b'test_string'))
print(_bytes_feature(u'test_bytes'.encode('utf-8')))

print(_float_feature(np.exp(1)))

print(_int64_feature(True))
print(_int64_feature(1))

bytes_list {
  value: "test_string"
}

bytes_list {
  value: "test_bytes"
}

float_list {
  value: 2.7182817459106445
}

int64_list {
  value: 1
}

int64_list {
  value: 1
}
WARNING: All log messages before absl::InitializeLog() is called are written to STDERR
I0000 00:00:1723791843.092175  194894 cuda_executor.cc:1015] successful NUMA node read from SysFS had negative value (-1), but there must be at least one NUMA node, so returning NUMA node zero. See more at https://github.com/torvalds/linux/blob/v6.0/Documentation/ABI/testing/sysfs-bus-pci#L344-L355
I0000 00:00:1723791843.095539  194894 cuda_executor.cc:1015] successful NUMA node read from SysFS had negative value (-1), but there must be at least one NUMA node, so returning NUMA node zero. See more at https://github.com/torvalds/linux/blob/v6.0/Documentation/ABI/testing/sysfs-bus-pci#L344-L355
I0000 00:00:1723791843.099144  194894 cuda_executor.cc:1015] successful NUMA node read from SysFS had negative value (-1), but there must be at least one NUMA node, so returning NUMA node zero. See more at https://github.com/torvalds/linux/blob/v6.0/Documentation/ABI/testing/sysfs-bus-pci#L344-L355
I0000 00:00:1723791843.102704  194894 cuda_executor.cc:1015] successful NUMA node read from SysFS had negative value (-1), but there must be at least one NUMA node, so returning NUMA node zero. See more at https://github.com/torvalds/linux/blob/v6.0/Documentation/ABI/testing/sysfs-bus-pci#L344-L355
I0000 00:00:1723791843.113978  194894 cuda_executor.cc:1015] successful NUMA node read from SysFS had negative value (-1), but there must be at least one NUMA node, so returning NUMA node zero. See more at https://github.com/torvalds/linux/blob/v6.0/Documentation/ABI/testing/sysfs-bus-pci#L344-L355
I0000 00:00:1723791843.117024  194894 cuda_executor.cc:1015] successful NUMA node read from SysFS had negative value (-1), but there must be at least one NUMA node, so returning NUMA node zero. See more at https://github.com/torvalds/linux/blob/v6.0/Documentation/ABI/testing/sysfs-bus-pci#L344-L355
I0000 00:00:1723791843.120462  194894 cuda_executor.cc:1015] successful NUMA node read from SysFS had negative value (-1), but there must be at least one NUMA node, so returning NUMA node zero. See more at https://github.com/torvalds/linux/blob/v6.0/Documentation/ABI/testing/sysfs-bus-pci#L344-L355
I0000 00:00:1723791843.123843  194894 cuda_executor.cc:1015] successful NUMA node read from SysFS had negative value (-1), but there must be at least one NUMA node, so returning NUMA node zero. See more at https://github.com/torvalds/linux/blob/v6.0/Documentation/ABI/testing/sysfs-bus-pci#L344-L355
I0000 00:00:1723791843.126718  194894 cuda_executor.cc:1015] successful NUMA node read from SysFS had negative value (-1), but there must be at least one NUMA node, so returning NUMA node zero. See more at https://github.com/torvalds/linux/blob/v6.0/Documentation/ABI/testing/sysfs-bus-pci#L344-L355
I0000 00:00:1723791843.129679  194894 cuda_executor.cc:1015] successful NUMA node read from SysFS had negative value (-1), but there must be at least one NUMA node, so returning NUMA node zero. See more at https://github.com/torvalds/linux/blob/v6.0/Documentation/ABI/testing/sysfs-bus-pci#L344-L355
I0000 00:00:1723791843.133016  194894 cuda_executor.cc:1015] successful NUMA node read from SysFS had negative value (-1), but there must be at least one NUMA node, so returning NUMA node zero. See more at https://github.com/torvalds/linux/blob/v6.0/Documentation/ABI/testing/sysfs-bus-pci#L344-L355
I0000 00:00:1723791843.136422  194894 cuda_executor.cc:1015] successful NUMA node read from SysFS had negative value (-1), but there must be at least one NUMA node, so returning NUMA node zero. See more at https://github.com/torvalds/linux/blob/v6.0/Documentation/ABI/testing/sysfs-bus-pci#L344-L355
I0000 00:00:1723791844.360431  194894 cuda_executor.cc:1015] successful NUMA node read from SysFS had negative value (-1), but there must be at least one NUMA node, so returning NUMA node zero. See more at https://github.com/torvalds/linux/blob/v6.0/Documentation/ABI/testing/sysfs-bus-pci#L344-L355
I0000 00:00:1723791844.362573  194894 cuda_executor.cc:1015] successful NUMA node read from SysFS had negative value (-1), but there must be at least one NUMA node, so returning NUMA node zero. See more at https://github.com/torvalds/linux/blob/v6.0/Documentation/ABI/testing/sysfs-bus-pci#L344-L355
I0000 00:00:1723791844.364572  194894 cuda_executor.cc:1015] successful NUMA node read from SysFS had negative value (-1), but there must be at least one NUMA node, so returning NUMA node zero. See more at https://github.com/torvalds/linux/blob/v6.0/Documentation/ABI/testing/sysfs-bus-pci#L344-L355
I0000 00:00:1723791844.366645  194894 cuda_executor.cc:1015] successful NUMA node read from SysFS had negative value (-1), but there must be at least one NUMA node, so returning NUMA node zero. See more at https://github.com/torvalds/linux/blob/v6.0/Documentation/ABI/testing/sysfs-bus-pci#L344-L355
I0000 00:00:1723791844.368643  194894 cuda_executor.cc:1015] successful NUMA node read from SysFS had negative value (-1), but there must be at least one NUMA node, so returning NUMA node zero. See more at https://github.com/torvalds/linux/blob/v6.0/Documentation/ABI/testing/sysfs-bus-pci#L344-L355
I0000 00:00:1723791844.370639  194894 cuda_executor.cc:1015] successful NUMA node read from SysFS had negative value (-1), but there must be at least one NUMA node, so returning NUMA node zero. See more at https://github.com/torvalds/linux/blob/v6.0/Documentation/ABI/testing/sysfs-bus-pci#L344-L355
I0000 00:00:1723791844.372538  194894 cuda_executor.cc:1015] successful NUMA node read from SysFS had negative value (-1), but there must be at least one NUMA node, so returning NUMA node zero. See more at https://github.com/torvalds/linux/blob/v6.0/Documentation/ABI/testing/sysfs-bus-pci#L344-L355
I0000 00:00:1723791844.374538  194894 cuda_executor.cc:1015] successful NUMA node read from SysFS had negative value (-1), but there must be at least one NUMA node, so returning NUMA node zero. See more at https://github.com/torvalds/linux/blob/v6.0/Documentation/ABI/testing/sysfs-bus-pci#L344-L355
I0000 00:00:1723791844.376473  194894 cuda_executor.cc:1015] successful NUMA node read from SysFS had negative value (-1), but there must be at least one NUMA node, so returning NUMA node zero. See more at https://github.com/torvalds/linux/blob/v6.0/Documentation/ABI/testing/sysfs-bus-pci#L344-L355
I0000 00:00:1723791844.378464  194894 cuda_executor.cc:1015] successful NUMA node read from SysFS had negative value (-1), but there must be at least one NUMA node, so returning NUMA node zero. See more at https://github.com/torvalds/linux/blob/v6.0/Documentation/ABI/testing/sysfs-bus-pci#L344-L355
I0000 00:00:1723791844.380358  194894 cuda_executor.cc:1015] successful NUMA node read from SysFS had negative value (-1), but there must be at least one NUMA node, so returning NUMA node zero. See more at https://github.com/torvalds/linux/blob/v6.0/Documentation/ABI/testing/sysfs-bus-pci#L344-L355
I0000 00:00:1723791844.382352  194894 cuda_executor.cc:1015] successful NUMA node read from SysFS had negative value (-1), but there must be at least one NUMA node, so returning NUMA node zero. See more at https://github.com/torvalds/linux/blob/v6.0/Documentation/ABI/testing/sysfs-bus-pci#L344-L355
I0000 00:00:1723791844.421137  194894 cuda_executor.cc:1015] successful NUMA node read from SysFS had negative value (-1), but there must be at least one NUMA node, so returning NUMA node zero. See more at https://github.com/torvalds/linux/blob/v6.0/Documentation/ABI/testing/sysfs-bus-pci#L344-L355
I0000 00:00:1723791844.423231  194894 cuda_executor.cc:1015] successful NUMA node read from SysFS had negative value (-1), but there must be at least one NUMA node, so returning NUMA node zero. See more at https://github.com/torvalds/linux/blob/v6.0/Documentation/ABI/testing/sysfs-bus-pci#L344-L355
I0000 00:00:1723791844.425187  194894 cuda_executor.cc:1015] successful NUMA node read from SysFS had negative value (-1), but there must be at least one NUMA node, so returning NUMA node zero. See more at https://github.com/torvalds/linux/blob/v6.0/Documentation/ABI/testing/sysfs-bus-pci#L344-L355
I0000 00:00:1723791844.427219  194894 cuda_executor.cc:1015] successful NUMA node read from SysFS had negative value (-1), but there must be at least one NUMA node, so returning NUMA node zero. See more at https://github.com/torvalds/linux/blob/v6.0/Documentation/ABI/testing/sysfs-bus-pci#L344-L355
I0000 00:00:1723791844.429165  194894 cuda_executor.cc:1015] successful NUMA node read from SysFS had negative value (-1), but there must be at least one NUMA node, so returning NUMA node zero. See more at https://github.com/torvalds/linux/blob/v6.0/Documentation/ABI/testing/sysfs-bus-pci#L344-L355
I0000 00:00:1723791844.431166  194894 cuda_executor.cc:1015] successful NUMA node read from SysFS had negative value (-1), but there must be at least one NUMA node, so returning NUMA node zero. See more at https://github.com/torvalds/linux/blob/v6.0/Documentation/ABI/testing/sysfs-bus-pci#L344-L355
I0000 00:00:1723791844.433071  194894 cuda_executor.cc:1015] successful NUMA node read from SysFS had negative value (-1), but there must be at least one NUMA node, so returning NUMA node zero. See more at https://github.com/torvalds/linux/blob/v6.0/Documentation/ABI/testing/sysfs-bus-pci#L344-L355
I0000 00:00:1723791844.435053  194894 cuda_executor.cc:1015] successful NUMA node read from SysFS had negative value (-1), but there must be at least one NUMA node, so returning NUMA node zero. See more at https://github.com/torvalds/linux/blob/v6.0/Documentation/ABI/testing/sysfs-bus-pci#L344-L355
I0000 00:00:1723791844.436984  194894 cuda_executor.cc:1015] successful NUMA node read from SysFS had negative value (-1), but there must be at least one NUMA node, so returning NUMA node zero. See more at https://github.com/torvalds/linux/blob/v6.0/Documentation/ABI/testing/sysfs-bus-pci#L344-L355
I0000 00:00:1723791844.439359  194894 cuda_executor.cc:1015] successful NUMA node read from SysFS had negative value (-1), but there must be at least one NUMA node, so returning NUMA node zero. See more at https://github.com/torvalds/linux/blob/v6.0/Documentation/ABI/testing/sysfs-bus-pci#L344-L355
I0000 00:00:1723791844.441678  194894 cuda_executor.cc:1015] successful NUMA node read from SysFS had negative value (-1), but there must be at least one NUMA node, so returning NUMA node zero. See more at https://github.com/torvalds/linux/blob/v6.0/Documentation/ABI/testing/sysfs-bus-pci#L344-L355
I0000 00:00:1723791844.444034  194894 cuda_executor.cc:1015] successful NUMA node read from SysFS had negative value (-1), but there must be at least one NUMA node, so returning NUMA node zero. See more at https://github.com/torvalds/linux/blob/v6.0/Documentation/ABI/testing/sysfs-bus-pci#L344-L355

All proto messages can be serialized to a binary-string using the .SerializeToString method:

feature = _float_feature(np.exp(1))

feature.SerializeToString()

b'\x12\x06\n\x04T\xf8-@'

Creating a tf.train.Example message

Suppose you want to create a tf.train.Example message from existing data. In practice, the dataset may come from anywhere, but the procedure of creating the tf.train.Example message from a single observation will be the same:

1. Within each observation, each value needs to be converted to a tf.train.Feature containing one of the 3 compatible types, using one of the functions above.

2. You create a map (dictionary) from the feature name string to the encoded feature value produced in #1.

3. The map produced in step 2 is converted to a Features message.

In this notebook, you will create a dataset using NumPy.

This dataset will have 4 features:

• a boolean feature, False or True with equal probability
• an integer feature uniformly randomly chosen from [0, 5]
• a string feature generated from a string table by using the integer feature as an index
• a float feature from a standard normal distribution

Consider a sample consisting of 10,000 independently and identically distributed observations from each of the above distributions:

# The number of observations in the dataset.
n_observations = int(1e4)

# Boolean feature, encoded as False or True.
feature0 = np.random.choice([False, True], n_observations)

# Integer feature, random from 0 to 4.
feature1 = np.random.randint(0, 5, n_observations)

# String feature.
strings = np.array([b'cat', b'dog', b'chicken', b'horse', b'goat'])
feature2 = strings[feature1]

# Float feature, from a standard normal distribution.
feature3 = np.random.randn(n_observations)

Each of these features can be coerced into a tf.train.Example-compatible type using one of _bytes_feature, _float_feature, _int64_feature. You can then create a tf.train.Example message from these encoded features:

@tf.py_function(Tout=tf.string)
def serialize_example(feature0, feature1, feature2, feature3):
  """
  Creates a tf.train.Example message ready to be written to a file.
  """
  # Create a dictionary mapping the feature name to the tf.train.Example-compatible
  # data type.
  feature = {
      'feature0': _int64_feature(feature0),
      'feature1': _int64_feature(feature1),
      'feature2': _bytes_feature(feature2),
      'feature3': _float_feature(feature3),
  }

  # Create a Features message using tf.train.Example.

  example_proto = tf.train.Example(features=tf.train.Features(feature=feature))
  return example_proto.SerializeToString()

For example, suppose you have a single observation from the dataset, [False, 4, bytes('goat'), 0.9876]. You can create and print the tf.train.Example message for this observation using serialize_example(). Each single observation will be written as a Features message as per the above. Note that the tf.train.Example message is just a wrapper around the Features message:

# This is an example observation from the dataset.

example_observation = [False, 4, b'goat', 0.9876]
serialized_example = serialize_example(*example_observation)
serialized_example

<tf.Tensor: shape=(), dtype=string, numpy=b'\nR\n\x11\n\x08feature1\x12\x05\x1a\x03\n\x01\x04\n\x14\n\x08feature3\x12\x08\x12\x06\n\x04[\xd3|?\n\x11\n\x08feature0\x12\x05\x1a\x03\n\x01\x00\n\x14\n\x08feature2\x12\x08\n\x06\n\x04goat'>

To decode the message use the tf.train.Example.FromString method.

example_proto = tf.train.Example.FromString(serialized_example.numpy())
example_proto

features {
  feature {
    key: "feature0"
    value {
      int64_list {
        value: 0
      }
    }
  }
  feature {
    key: "feature1"
    value {
      int64_list {
        value: 4
      }
    }
  }
  feature {
    key: "feature2"
    value {
      bytes_list {
        value: "goat"
      }
    }
  }
  feature {
    key: "feature3"
    value {
      float_list {
        value: 0.9876000285148621
      }
    }
  }
}

TFRecords format details

A TFRecord file contains a sequence of records. The file can only be read sequentially.

Each record contains a byte-string, for the data-payload, plus the data-length, and CRC-32C (32-bit CRC using the Castagnoli polynomial) hashes for integrity checking.

Each record is stored in the following formats:

uint64 length
uint32 masked_crc32_of_length
byte   data[length]
uint32 masked_crc32_of_data

The records are concatenated together to produce the file. CRCs are described here, and the mask of a CRC is:

masked_crc = ((crc >> 15) | (crc << 17)) + 0xa282ead8ul

Note: There is no requirement to use tf.train.Example in TFRecord files. tf.train.Example is just a method of serializing dictionaries to byte-strings. Any byte-string that can be decoded in TensorFlow could be stored in a TFRecord file. Examples include: lines of text, JSON (using tf.io.decode_json_example), encoded image data, or serialized tf.Tensors (using tf.io.serialize_tensor/tf.io.parse_tensor). See the tf.io module for more options.

Reading and writing TFRecord files

The tf.io module also contains pure-Python functions for reading and writing TFRecord files.

Writing a TFRecord file

Next, write the 10,000 observations to the file test.tfrecord. Each observation is converted to a tf.train.Example message, then written to file. You can then verify that the file test.tfrecord has been created:

filename = 'test.tfrecord'

# Write the `tf.train.Example` observations to the file.
with tf.io.TFRecordWriter(filename) as writer:
  for i in range(n_observations):
    example = serialize_example(feature0[i], feature1[i], feature2[i], feature3[i])
    writer.write(example.numpy())

du -sh {filename}

984K    test.tfrecord

Reading a TFRecord file in python

These serialized tensors can be easily parsed using tf.train.Example.ParseFromString:

filenames = [filename]
raw_dataset = tf.data.TFRecordDataset(filenames)
raw_dataset

<TFRecordDatasetV2 element_spec=TensorSpec(shape=(), dtype=tf.string, name=None)>

for raw_record in raw_dataset.take(1):
  example = tf.train.Example()
  example.ParseFromString(raw_record.numpy())
  print(example)

features {
  feature {
    key: "feature0"
    value {
      int64_list {
        value: 0
      }
    }
  }
  feature {
    key: "feature1"
    value {
      int64_list {
        value: 3
      }
    }
  }
  feature {
    key: "feature2"
    value {
      bytes_list {
        value: "horse"
      }
    }
  }
  feature {
    key: "feature3"
    value {
      float_list {
        value: -0.6452258229255676
      }
    }
  }
}

That returns a tf.train.Example proto which is dificult to use as is, but it's fundamentally a representation of a:

Dict[str,
     Union[List[float],
           List[int],
           List[str]]]

The following code manually converts the Example to a dictionary of NumPy arrays, without using TensorFlow Ops. Refer to the PROTO file for details.

result = {}
# example.features.feature is the dictionary
for key, feature in example.features.feature.items():
  # The values are the Feature objects which contain a `kind` which contains:
  # one of three fields: bytes_list, float_list, int64_list

  kind = feature.WhichOneof('kind')
  result[key] = np.array(getattr(feature, kind).value)

result

{'feature2': array([b'horse'], dtype='|S5'),
 'feature1': array([3]),
 'feature0': array([0]),
 'feature3': array([-0.64522582])}

Reading a TFRecord file Using tf.data

You can also read the TFRecord file using the tf.data.TFRecordDataset class.

More information on consuming TFRecord files using tf.data can be found in the tf.data: Build TensorFlow input pipelines guide.

Using TFRecordDatasets can be useful for standardizing input data and optimizing performance.

filenames = [filename]
raw_dataset = tf.data.TFRecordDataset(filenames)
raw_dataset

<TFRecordDatasetV2 element_spec=TensorSpec(shape=(), dtype=tf.string, name=None)>

At this point the dataset contains serialized tf.train.Example messages. When iterated over it returns these as scalar string tensors.

Use the .take method to only show the first 10 records.

Note: iterating over a tf.data.Dataset only works with eager execution enabled.

for raw_record in raw_dataset.take(10):
  print(repr(raw_record))

<tf.Tensor: shape=(), dtype=string, numpy=b'\nS\n\x11\n\x08feature1\x12\x05\x1a\x03\n\x01\x03\n\x11\n\x08feature0\x12\x05\x1a\x03\n\x01\x00\n\x15\n\x08feature2\x12\t\n\x07\n\x05horse\n\x14\n\x08feature3\x12\x08\x12\x06\n\x04\x85-%\xbf'>
<tf.Tensor: shape=(), dtype=string, numpy=b'\nU\n\x14\n\x08feature3\x12\x08\x12\x06\n\x04\xc0,\xec\xbe\n\x17\n\x08feature2\x12\x0b\n\t\n\x07chicken\n\x11\n\x08feature0\x12\x05\x1a\x03\n\x01\x01\n\x11\n\x08feature1\x12\x05\x1a\x03\n\x01\x02'>
<tf.Tensor: shape=(), dtype=string, numpy=b'\nR\n\x14\n\x08feature3\x12\x08\x12\x06\n\x04\xd6O\xb8?\n\x11\n\x08feature1\x12\x05\x1a\x03\n\x01\x04\n\x11\n\x08feature0\x12\x05\x1a\x03\n\x01\x01\n\x14\n\x08feature2\x12\x08\n\x06\n\x04goat'>
<tf.Tensor: shape=(), dtype=string, numpy=b'\nR\n\x14\n\x08feature3\x12\x08\x12\x06\n\x04\xf3\xbf\xa0\xbf\n\x14\n\x08feature2\x12\x08\n\x06\n\x04goat\n\x11\n\x08feature1\x12\x05\x1a\x03\n\x01\x04\n\x11\n\x08feature0\x12\x05\x1a\x03\n\x01\x01'>
<tf.Tensor: shape=(), dtype=string, numpy=b'\nS\n\x15\n\x08feature2\x12\t\n\x07\n\x05horse\n\x11\n\x08feature0\x12\x05\x1a\x03\n\x01\x01\n\x14\n\x08feature3\x12\x08\x12\x06\n\x04\x97\x1aE\xbe\n\x11\n\x08feature1\x12\x05\x1a\x03\n\x01\x03'>
<tf.Tensor: shape=(), dtype=string, numpy=b'\nU\n\x14\n\x08feature3\x12\x08\x12\x06\n\x04~<\xe0\xbe\n\x11\n\x08feature1\x12\x05\x1a\x03\n\x01\x02\n\x11\n\x08feature0\x12\x05\x1a\x03\n\x01\x00\n\x17\n\x08feature2\x12\x0b\n\t\n\x07chicken'>
<tf.Tensor: shape=(), dtype=string, numpy=b'\nU\n\x11\n\x08feature1\x12\x05\x1a\x03\n\x01\x02\n\x17\n\x08feature2\x12\x0b\n\t\n\x07chicken\n\x14\n\x08feature3\x12\x08\x12\x06\n\x04\x0cW\x18>\n\x11\n\x08feature0\x12\x05\x1a\x03\n\x01\x01'>
<tf.Tensor: shape=(), dtype=string, numpy=b'\nQ\n\x14\n\x08feature3\x12\x08\x12\x06\n\x04\x8d\xdd\xcb\xbf\n\x11\n\x08feature0\x12\x05\x1a\x03\n\x01\x01\n\x11\n\x08feature1\x12\x05\x1a\x03\n\x01\x00\n\x13\n\x08feature2\x12\x07\n\x05\n\x03cat'>
<tf.Tensor: shape=(), dtype=string, numpy=b'\nQ\n\x14\n\x08feature3\x12\x08\x12\x06\n\x04\x95\xdf=?\n\x11\n\x08feature1\x12\x05\x1a\x03\n\x01\x01\n\x13\n\x08feature2\x12\x07\n\x05\n\x03dog\n\x11\n\x08feature0\x12\x05\x1a\x03\n\x01\x01'>
<tf.Tensor: shape=(), dtype=string, numpy=b'\nQ\n\x14\n\x08feature3\x12\x08\x12\x06\n\x04\x8dC\xb8\xbd\n\x11\n\x08feature0\x12\x05\x1a\x03\n\x01\x00\n\x13\n\x08feature2\x12\x07\n\x05\n\x03cat\n\x11\n\x08feature1\x12\x05\x1a\x03\n\x01\x00'>

These tensors can be parsed using the function below. Note that the feature_description is necessary here because tf.data.Datasets use graph-execution, and need this description to build their shape and type signature:

# Create a description of the features.
feature_description = {
    'feature0': tf.io.FixedLenFeature([], tf.int64, default_value=0),
    'feature1': tf.io.FixedLenFeature([], tf.int64, default_value=0),
    'feature2': tf.io.FixedLenFeature([], tf.string, default_value=''),
    'feature3': tf.io.FixedLenFeature([], tf.float32, default_value=0.0),
}

def _parse_function(example_proto):
  # Parse the input `tf.train.Example` proto using the dictionary above.
  return tf.io.parse_single_example(example_proto, feature_description)

Alternatively, use tf.parse_example to parse the whole batch at once. Apply this function to each item in the dataset using the tf.data.Dataset.map method:

parsed_dataset = raw_dataset.map(_parse_function)
parsed_dataset

<_MapDataset element_spec={'feature0': TensorSpec(shape=(), dtype=tf.int64, name=None), 'feature1': TensorSpec(shape=(), dtype=tf.int64, name=None), 'feature2': TensorSpec(shape=(), dtype=tf.string, name=None), 'feature3': TensorSpec(shape=(), dtype=tf.float32, name=None)}>

Use eager execution to display the observations in the dataset. There are 10,000 observations in this dataset, but you will only display the first 10. The data is displayed as a dictionary of features. Each item is a tf.Tensor, and the numpy element of this tensor displays the value of the feature:

for parsed_record in parsed_dataset.take(10):
  print(repr(parsed_record))

{'feature0': <tf.Tensor: shape=(), dtype=int64, numpy=0>, 'feature1': <tf.Tensor: shape=(), dtype=int64, numpy=3>, 'feature2': <tf.Tensor: shape=(), dtype=string, numpy=b'horse'>, 'feature3': <tf.Tensor: shape=(), dtype=float32, numpy=-0.6452258>}
{'feature0': <tf.Tensor: shape=(), dtype=int64, numpy=1>, 'feature1': <tf.Tensor: shape=(), dtype=int64, numpy=2>, 'feature2': <tf.Tensor: shape=(), dtype=string, numpy=b'chicken'>, 'feature3': <tf.Tensor: shape=(), dtype=float32, numpy=-0.46127892>}
{'feature0': <tf.Tensor: shape=(), dtype=int64, numpy=1>, 'feature1': <tf.Tensor: shape=(), dtype=int64, numpy=4>, 'feature2': <tf.Tensor: shape=(), dtype=string, numpy=b'goat'>, 'feature3': <tf.Tensor: shape=(), dtype=float32, numpy=1.4399364>}
{'feature0': <tf.Tensor: shape=(), dtype=int64, numpy=1>, 'feature1': <tf.Tensor: shape=(), dtype=int64, numpy=4>, 'feature2': <tf.Tensor: shape=(), dtype=string, numpy=b'goat'>, 'feature3': <tf.Tensor: shape=(), dtype=float32, numpy=-1.2558578>}
{'feature0': <tf.Tensor: shape=(), dtype=int64, numpy=1>, 'feature1': <tf.Tensor: shape=(), dtype=int64, numpy=3>, 'feature2': <tf.Tensor: shape=(), dtype=string, numpy=b'horse'>, 'feature3': <tf.Tensor: shape=(), dtype=float32, numpy=-0.19248424>}
{'feature0': <tf.Tensor: shape=(), dtype=int64, numpy=0>, 'feature1': <tf.Tensor: shape=(), dtype=int64, numpy=2>, 'feature2': <tf.Tensor: shape=(), dtype=string, numpy=b'chicken'>, 'feature3': <tf.Tensor: shape=(), dtype=float32, numpy=-0.43796152>}
{'feature0': <tf.Tensor: shape=(), dtype=int64, numpy=1>, 'feature1': <tf.Tensor: shape=(), dtype=int64, numpy=2>, 'feature2': <tf.Tensor: shape=(), dtype=string, numpy=b'chicken'>, 'feature3': <tf.Tensor: shape=(), dtype=float32, numpy=0.14876956>}
{'feature0': <tf.Tensor: shape=(), dtype=int64, numpy=1>, 'feature1': <tf.Tensor: shape=(), dtype=int64, numpy=0>, 'feature2': <tf.Tensor: shape=(), dtype=string, numpy=b'cat'>, 'feature3': <tf.Tensor: shape=(), dtype=float32, numpy=-1.5926987>}
{'feature0': <tf.Tensor: shape=(), dtype=int64, numpy=1>, 'feature1': <tf.Tensor: shape=(), dtype=int64, numpy=1>, 'feature2': <tf.Tensor: shape=(), dtype=string, numpy=b'dog'>, 'feature3': <tf.Tensor: shape=(), dtype=float32, numpy=0.74169284>}
{'feature0': <tf.Tensor: shape=(), dtype=int64, numpy=0>, 'feature1': <tf.Tensor: shape=(), dtype=int64, numpy=0>, 'feature2': <tf.Tensor: shape=(), dtype=string, numpy=b'cat'>, 'feature3': <tf.Tensor: shape=(), dtype=float32, numpy=-0.08997259>}

Here, the tf.parse_example function unpacks the tf.train.Example fields into standard tensors.

Walkthrough: Reading and writing image data

This is an end-to-end example of how to read and write image data using TFRecords. Using an image as input data, you will write the data as a TFRecord file, then read the file back and display the image.

This can be useful if, for example, you want to use several models on the same input dataset. Instead of storing the image data raw, it can be preprocessed into the TFRecords format, and that can be used in all further processing and modelling.

First, let's download this image of a cat in the snow and this photo of the Williamsburg Bridge, NYC under construction.

Fetch the images

cat_in_snow  = tf.keras.utils.get_file(
    '320px-Felis_catus-cat_on_snow.jpg',
    'https://storage.googleapis.com/download.tensorflow.org/example_images/320px-Felis_catus-cat_on_snow.jpg')

williamsburg_bridge = tf.keras.utils.get_file(
    '194px-New_East_River_Bridge_from_Brooklyn_det.4a09796u.jpg',
    'https://storage.googleapis.com/download.tensorflow.org/example_images/194px-New_East_River_Bridge_from_Brooklyn_det.4a09796u.jpg')

Downloading data from https://storage.googleapis.com/download.tensorflow.org/example_images/320px-Felis_catus-cat_on_snow.jpg
17858/17858 ━━━━━━━━━━━━━━━━━━━━ 0s 0us/step
Downloading data from https://storage.googleapis.com/download.tensorflow.org/example_images/194px-New_East_River_Bridge_from_Brooklyn_det.4a09796u.jpg
15477/15477 ━━━━━━━━━━━━━━━━━━━━ 0s 0us/step

display.display(display.Image(filename=cat_in_snow))
display.display(display.HTML('Image cc-by: <a "href=https://commons.wikimedia.org/wiki/File:Felis_catus-cat_on_snow.jpg">Von.grzanka</a>'))

display.display(display.Image(filename=williamsburg_bridge))
display.display(display.HTML('<a "href=https://commons.wikimedia.org/wiki/File:New_East_River_Bridge_from_Brooklyn_det.4a09796u.jpg">From Wikimedia</a>'))

Write the TFRecord file

As before, encode the features as types compatible with tf.train.Example. This stores the raw image string feature, as well as the height, width, depth, and arbitrary label feature. The latter is used when you write the file to distinguish between the cat image and the bridge image. Use 0 for the cat image, and 1 for the bridge image:

image_labels = {
    cat_in_snow : 0,
    williamsburg_bridge : 1,
}

# This is an example, just using the cat image.
image_string = open(cat_in_snow, 'rb').read()

label = image_labels[cat_in_snow]

# Create a dictionary with features that may be relevant.
def image_example(image_string, label):
  image_shape = tf.io.decode_jpeg(image_string).shape

  feature = {
      'height': _int64_feature(image_shape[0]),
      'width': _int64_feature(image_shape[1]),
      'depth': _int64_feature(image_shape[2]),
      'label': _int64_feature(label),
      'image_raw': _bytes_feature(image_string),
  }

  return tf.train.Example(features=tf.train.Features(feature=feature))

for line in str(image_example(image_string, label)).split('\n')[:15]:
  print(line)
print('...')

features {
  feature {
    key: "depth"
    value {
      int64_list {
        value: 3
      }
    }
  }
  feature {
    key: "height"
    value {
      int64_list {
        value: 213
      }
...

Notice that all of the features are now stored in the tf.train.Example message. Next, functionalize the code above and write the example messages to a file named images.tfrecords:

# Write the raw image files to `images.tfrecords`.
# First, process the two images into `tf.train.Example` messages.
# Then, write to a `.tfrecords` file.
record_file = 'images.tfrecords'
with tf.io.TFRecordWriter(record_file) as writer:
  for filename, label in image_labels.items():
    image_string = open(filename, 'rb').read()
    tf_example = image_example(image_string, label)
    writer.write(tf_example.SerializeToString())

du -sh {record_file}

36K images.tfrecords

Read the TFRecord file

You now have the file—images.tfrecords—and can now iterate over the records in it to read back what you wrote. Given that in this example you will only reproduce the image, the only feature you will need is the raw image string. Extract it using the getters described above, namely example.features.feature['image_raw'].bytes_list.value[0]. You can also use the labels to determine which record is the cat and which one is the bridge:

raw_image_dataset = tf.data.TFRecordDataset('images.tfrecords')

# Create a dictionary describing the features.
image_feature_description = {
    'height': tf.io.FixedLenFeature([], tf.int64),
    'width': tf.io.FixedLenFeature([], tf.int64),
    'depth': tf.io.FixedLenFeature([], tf.int64),
    'label': tf.io.FixedLenFeature([], tf.int64),
    'image_raw': tf.io.FixedLenFeature([], tf.string),
}

def _parse_image_function(example_proto):
  # Parse the input tf.train.Example proto using the dictionary above.
  return tf.io.parse_single_example(example_proto, image_feature_description)

parsed_image_dataset = raw_image_dataset.map(_parse_image_function)
parsed_image_dataset

<_MapDataset element_spec={'depth': TensorSpec(shape=(), dtype=tf.int64, name=None), 'height': TensorSpec(shape=(), dtype=tf.int64, name=None), 'image_raw': TensorSpec(shape=(), dtype=tf.string, name=None), 'label': TensorSpec(shape=(), dtype=tf.int64, name=None), 'width': TensorSpec(shape=(), dtype=tf.int64, name=None)}>

Recover the images from the TFRecord file:

for image_features in parsed_image_dataset:
  image_raw = image_features['image_raw'].numpy()
  display.display(display.Image(data=image_raw))