flux tensoriel : : opérations : : MatriceDiagV3

#include <array_ops.h>

Renvoie un tenseur diagonal par lots avec des valeurs diagonales par lots données.

Résumé

Renvoie un tenseur avec le contenu en diagonal comme k[0] -th à k[1] -th diagonales d'une matrice, avec tout le reste complété par padding . num_rows et num_cols spécifient la dimension de la matrice la plus interne de la sortie. Si les deux ne sont pas spécifiés, l'opération suppose que la matrice la plus interne est carrée et déduit sa taille de k et de la dimension la plus interne de diagonal . Si un seul d'entre eux est spécifié, l'opération suppose que la valeur non spécifiée est la plus petite possible en fonction d'autres critères.

Soit diagonal avoir r dimensions [I, J, ..., L, M, N] . Le tenseur de sortie a le rang r+1 de forme [I, J, ..., L, M, num_rows, num_cols] lorsqu'une seule diagonale est donnée ( k est un entier ou k[0] == k[1] ) . Sinon, il a le rang r avec la forme [I, J, ..., L, num_rows, num_cols] .

La deuxième dimension la plus intérieure de la diagonal a une double signification. Lorsque k est scalaire ou k[0] == k[1] , M fait partie de la taille du lot [I, J, ..., M], et le tenseur de sortie est :

output[i, j, ..., l, m, n]
  = diagonal[i, j, ..., l, n-max(d_upper, 0)] ; if n - m == d_upper
    padding_value                             ; otherwise

Sinon, M est traité comme le nombre de diagonales de la matrice dans le même lot ( M = k[1]-k[0]+1 ), et le tenseur de sortie est :

output[i, j, ..., l, m, n]
  = diagonal[i, j, ..., l, diag_index, index_in_diag] ; if k[0] <= d <= k[1]
    padding_value                                     ; otherwise
où d = n - m , diag_index = [k] - d et index_in_diag = n - max(d, 0) + offset .

offset est nul sauf lorsque l'alignement de la diagonale est vers la droite. 

offset = max_diag_len - diag_len(d) ; if (`align` in {RIGHT_LEFT, RIGHT_RIGHT}
                                           and `d >= 0`) or
                                         (`align` in {LEFT_RIGHT, RIGHT_RIGHT}
                                           and `d <= 0`)
         0                          ; otherwise
où diag_len(d) = min(cols - max(d, 0), rows + min(d, 0)) .

Par exemple: 

# The main diagonal.
diagonal = np.array([[1, 2, 3, 4],            # Input shape: (2, 4)
                     [5, 6, 7, 8]])
tf.matrix_diag(diagonal) ==> [[[1, 0, 0, 0],  # Output shape: (2, 4, 4)
                               [0, 2, 0, 0],
                               [0, 0, 3, 0],
                               [0, 0, 0, 4]],
                              [[5, 0, 0, 0],
                               [0, 6, 0, 0],
                               [0, 0, 7, 0],
                               [0, 0, 0, 8]]]

# A superdiagonal (per batch).
diagonal = np.array([[1, 2, 3],  # Input shape: (2, 3)
                     [4, 5, 6]])
tf.matrix_diag(diagonal, k = 1)
  ==> [[[0, 1, 0, 0],  # Output shape: (2, 4, 4)
        [0, 0, 2, 0],
        [0, 0, 0, 3],
        [0, 0, 0, 0]],
       [[0, 4, 0, 0],
        [0, 0, 5, 0],
        [0, 0, 0, 6],
        [0, 0, 0, 0]]]

# A tridiagonal band (per batch).
diagonals = np.array([[[0, 8, 9],  # Input shape: (2, 2, 3)
                       [1, 2, 3],
                       [4, 5, 0]],
                      [[0, 2, 3],
                       [6, 7, 9],
                       [9, 1, 0]]])
tf.matrix_diag(diagonals, k = (-1, 1))
  ==> [[[1, 8, 0],  # Output shape: (2, 3, 3)
        [4, 2, 9],
        [0, 5, 3]],
       [[6, 2, 0],
        [9, 7, 3],
        [0, 1, 9]]]

# LEFT_RIGHT alignment.
diagonals = np.array([[[8, 9, 0],  # Input shape: (2, 2, 3)
                       [1, 2, 3],
                       [0, 4, 5]],
                      [[2, 3, 0],
                       [6, 7, 9],
                       [0, 9, 1]]])
tf.matrix_diag(diagonals, k = (-1, 1), align="LEFT_RIGHT")
  ==> [[[1, 8, 0],  # Output shape: (2, 3, 3)
        [4, 2, 9],
        [0, 5, 3]],
       [[6, 2, 0],
        [9, 7, 3],
        [0, 1, 9]]]

# Rectangular matrix.
diagonal = np.array([1, 2])  # Input shape: (2)
tf.matrix_diag(diagonal, k = -1, num_rows = 3, num_cols = 4)
  ==> [[0, 0, 0, 0],  # Output shape: (3, 4)
       [1, 0, 0, 0],
       [0, 2, 0, 0]]

# Rectangular matrix with inferred num_cols and padding_value = 9.
tf.matrix_diag(diagonal, k = -1, num_rows = 3, padding_value = 9)
  ==> [[9, 9],  # Output shape: (3, 2)
       [1, 9],
       [9, 2]]

  

  
Arguments:
    
      
  • scope: A Scope object
    • 
      
  • diagonal: Rank r, where r >= 1
    • 
      
  • k: Diagonal offset(s). Positive value means superdiagonal, 0 refers to the main diagonal, and negative value means subdiagonals. k can be a single integer (for a single diagonal) or a pair of integers specifying the low and high ends of a matrix band. k[0] must not be larger than k[1].
    • 
      
  • num_rows: The number of rows of the output matrix. If it is not provided, the op assumes the output matrix is a square matrix and infers the matrix size from k and the innermost dimension of diagonal.
    • 
      
  • num_cols: The number of columns of the output matrix. If it is not provided, the op assumes the output matrix is a square matrix and infers the matrix size from k and the innermost dimension of diagonal.
    • 
      
  • padding_value: The number to fill the area outside the specified diagonal band with. Default is 0.
    • 
    

  
Optional attributes (see Attrs):
    
      
  • align: Some diagonals are shorter than max_diag_len and need to be padded. align is a string specifying how superdiagonals and subdiagonals should be aligned, respectively. There are four possible alignments: "RIGHT_LEFT" (default), "LEFT_RIGHT", "LEFT_LEFT", and "RIGHT_RIGHT". "RIGHT_LEFT" aligns superdiagonals to the right (left-pads the row) and subdiagonals to the left (right-pads the row). It is the packing format LAPACK uses. cuSPARSE uses "LEFT_RIGHT", which is the opposite alignment.
    • 
    

  
Returns:
    
      
  • Output: Has rank r+1 when k is an integer or k[0] == k[1], rank r otherwise. 
    • 
    

  

    

      
        
Constructors and Destructors

      		
    

    

      
        MatrixDiagV3(const ::tensorflow::Scope & scope, ::tensorflow::Input diagonal, ::tensorflow::Input k, ::tensorflow::Input num_rows, ::tensorflow::Input num_cols, ::tensorflow::Input padding_value)
        

      		
    

    

      
        MatrixDiagV3(const ::tensorflow::Scope & scope, ::tensorflow::Input diagonal, ::tensorflow::Input k, ::tensorflow::Input num_rows, ::tensorflow::Input num_cols, ::tensorflow::Input padding_value, const MatrixDiagV3::Attrs & attrs)
        

      		
    

  

  

    

      
        
Public attributes

      		
    

    

      
        operation
      
      
        
      
    

    

      
        output
      
      
        
      
    

  

  

    

      
        
Public functions

      		
    

    

      
        node() const 
      
      
        

          ::tensorflow::Node *
        

      		
    

    

      
        operator::tensorflow::Input() const 
      
      
        

          
        

      		
    

    

      
        operator::tensorflow::Output() const 
      
      
        

          
        

      		
    

  

  

    

      
        
Public static functions

      		
    

    

      
        Align(StringPiece x)
      
      
        
      
    

  

  

    

      
        
Structs

      		
    

    

      
        tensorflow::ops::MatrixDiagV3::Attrs
      
      
        
Optional attribute setters for MatrixDiagV3. 

      		
    

  

  
Public attributes

  

    
operation

    
Operation operation
 sortir 
 
::tensorflow::Output output
 Fonctions publiques 
 MatriceDiagV3 
 
 MatrixDiagV3(
  const ::tensorflow::Scope & scope,
  ::tensorflow::Input diagonal,
  ::tensorflow::Input k,
  ::tensorflow::Input num_rows,
  ::tensorflow::Input num_cols,
  ::tensorflow::Input padding_value
)
 MatriceDiagV3 
 
 MatrixDiagV3(
  const ::tensorflow::Scope & scope,
  ::tensorflow::Input diagonal,
  ::tensorflow::Input k,
  ::tensorflow::Input num_rows,
  ::tensorflow::Input num_cols,
  ::tensorflow::Input padding_value,
  const MatrixDiagV3::Attrs & attrs
)
 nœud 
 
::tensorflow::Node * node() const 
 opérateur :: tensorflow :: Entrée 
 
 operator::tensorflow::Input() const 
 opérateur :: tensorflow :: Sortie 
 
 operator::tensorflow::Output() const 
 Fonctions statiques publiques 
 Aligner
 
Attrs Align(
  StringPiece x
)