Code d'énumération finale publique
The canonical error codes for TensorFlow APIs. Warnings: - Do not change any numeric assignments. - Changes to this list should only be made if there is a compelling need that can't be satisfied in another way. Such changes must be approved by at least two OWNERS. - These error codes must match gRPC and protobuf error codes (except for DO_NOT_USE_RESERVED_FOR_FUTURE_EXPANSION_USE_DEFAULT_IN_SWITCH_INSTEAD_). Sometimes multiple error codes may apply. Services should return the most specific error code that applies. For example, prefer OUT_OF_RANGE over FAILED_PRECONDITION if both codes apply. Similarly prefer NOT_FOUND or ALREADY_EXISTS over FAILED_PRECONDITION.Protobuf enum
tensorflow.error.Code
Constantes
int | ABORTED_VALUE | The operation was aborted, typically due to a concurrency issue like sequencer check failures, transaction aborts, etc. |
int | ALREADY_EXISTS_VALUE | Some entity that we attempted to create (e.g., file or directory) already exists. |
int | CANCELLED_VALUE | The operation was cancelled (typically by the caller). |
int | DATA_LOSS_VALUE | Unrecoverable data loss or corruption. |
int | DEADLINE_EXCEEDED_VALUE | Deadline expired before operation could complete. |
int | DO_NOT_USE_RESERVED_FOR_FUTURE_EXPANSION_USE_DEFAULT_IN_SWITCH_INSTEAD__VALUE | An extra enum entry to prevent people from writing code that fails to compile when a new code is added. |
int | FAILED_PRECONDITION_VALUE | Operation was rejected because the system is not in a state required for the operation's execution. |
int | INTERNAL_VALUE | Internal errors. |
int | INVALID_ARGUMENT_VALUE | Client specified an invalid argument. |
int | NOT_FOUND_VALUE | Some requested entity (e.g., file or directory) was not found. |
int | OK_VALUE | Not an error; returned on success OK = 0; |
int | OUT_OF_RANGE_VALUE | Operation tried to iterate past the valid input range. |
int | PERMISSION_DENIED_VALUE | The caller does not have permission to execute the specified operation. |
int | RESOURCE_EXHAUSTED_VALUE | Some resource has been exhausted, perhaps a per-user quota, or perhaps the entire file system is out of space. |
int | UNAUTHENTICATE_VALUE | The request does not have valid authentication credentials for the operation. |
int | UNAVAILABLE_VALUE | The service is currently unavailable. |
int | UNIMPLEMENTED_VALUE | Operation is not implemented or not supported/enabled in this service. |
int | UNKNOWN_VALUE | Unknown error. |
Méthodes héritées
Valeurs d'énumération
Code final statique public ABORTED
The operation was aborted, typically due to a concurrency issue like sequencer check failures, transaction aborts, etc. See litmus test above for deciding between FAILED_PRECONDITION, ABORTED, and UNAVAILABLE.
ABORTED = 10;
Code final statique public ALREADY_EXISTS
Some entity that we attempted to create (e.g., file or directory) already exists.
ALREADY_EXISTS = 6;
Code final statique public ANNULÉ
The operation was cancelled (typically by the caller).
CANCELLED = 1;
Code final statique public DATA_LOSS
Unrecoverable data loss or corruption.
DATA_LOSS = 15;
Code final statique public DEADLINE_EXCEEDED
Deadline expired before operation could complete. For operations that change the state of the system, this error may be returned even if the operation has completed successfully. For example, a successful response from a server could have been delayed long enough for the deadline to expire.
DEADLINE_EXCEEDED = 4;
Code final statique public DO_NOT_USE_RESERVED_FOR_FUTURE_EXPANSION_USE_DEFAULT_IN_SWITCH_INSTEAD_
An extra enum entry to prevent people from writing code that fails to compile when a new code is added. Nobody should ever reference this enumeration entry. In particular, if you write C++ code that switches on this enumeration, add a default: case instead of a case that mentions this enumeration entry. Nobody should rely on the value (currently 20) listed here. It may change in the future.
DO_NOT_USE_RESERVED_FOR_FUTURE_EXPANSION_USE_DEFAULT_IN_SWITCH_INSTEAD_ = 20;
Code final statique public FAILED_PRECONDITION
Operation was rejected because the system is not in a state required for the operation's execution. For example, directory to be deleted may be non-empty, an rmdir operation is applied to a non-directory, etc. A litmus test that may help a service implementor in deciding between FAILED_PRECONDITION, ABORTED, and UNAVAILABLE: (a) Use UNAVAILABLE if the client can retry just the failing call. (b) Use ABORTED if the client should retry at a higher-level (e.g., restarting a read-modify-write sequence). (c) Use FAILED_PRECONDITION if the client should not retry until the system state has been explicitly fixed. E.g., if an "rmdir" fails because the directory is non-empty, FAILED_PRECONDITION should be returned since the client should not retry unless they have first fixed up the directory by deleting files from it. (d) Use FAILED_PRECONDITION if the client performs conditional REST Get/Update/Delete on a resource and the resource on the server does not match the condition. E.g., conflicting read-modify-write on the same resource.
FAILED_PRECONDITION = 9;
Code final statique public INTERNE
Internal errors. Means some invariant expected by the underlying system has been broken. If you see one of these errors, something is very broken.
INTERNAL = 13;
Code final statique public INVALID_ARGUMENT
Client specified an invalid argument. Note that this differs from FAILED_PRECONDITION. INVALID_ARGUMENT indicates arguments that are problematic regardless of the state of the system (e.g., a malformed file name).
INVALID_ARGUMENT = 3;
Code final statique public NOT_FOUND
Some requested entity (e.g., file or directory) was not found. For privacy reasons, this code *may* be returned when the client does not have the access right to the entity.
NOT_FOUND = 5;
Code final statique public OK
Not an error; returned on success
OK = 0;
Code final statique public OUT_OF_RANGE
Operation tried to iterate past the valid input range. E.g., seeking or reading past end of file. Unlike INVALID_ARGUMENT, this error indicates a problem that may be fixed if the system state changes. For example, a 32-bit file system will generate INVALID_ARGUMENT if asked to read at an offset that is not in the range [0,2^32-1], but it will generate OUT_OF_RANGE if asked to read from an offset past the current file size. There is a fair bit of overlap between FAILED_PRECONDITION and OUT_OF_RANGE. We recommend using OUT_OF_RANGE (the more specific error) when it applies so that callers who are iterating through a space can easily look for an OUT_OF_RANGE error to detect when they are done.
OUT_OF_RANGE = 11;
Code final statique public PERMISSION_DENIED
The caller does not have permission to execute the specified operation. PERMISSION_DENIED must not be used for rejections caused by exhausting some resource (use RESOURCE_EXHAUSTED instead for those errors). PERMISSION_DENIED must not be used if the caller can not be identified (use UNAUTHENTICATED instead for those errors).
PERMISSION_DENIED = 7;
Code final statique public RESOURCE_EXHAUSTED
Some resource has been exhausted, perhaps a per-user quota, or perhaps the entire file system is out of space.
RESOURCE_EXHAUSTED = 8;
Code final statique public NON AUTHENTIFIÉ
The request does not have valid authentication credentials for the operation.
UNAUTHENTICATED = 16;
Code final statique public INDISPONIBLE
The service is currently unavailable. This is a most likely a transient condition and may be corrected by retrying with a backoff. See litmus test above for deciding between FAILED_PRECONDITION, ABORTED, and UNAVAILABLE.
UNAVAILABLE = 14;
Code final statique public NON IMPLÉMENTÉ
Operation is not implemented or not supported/enabled in this service.
UNIMPLEMENTED = 12;
Code final statique public INCONNU
Unknown error. An example of where this error may be returned is if a Status value received from another address space belongs to an error-space that is not known in this address space. Also errors raised by APIs that do not return enough error information may be converted to this error.
UNKNOWN = 2;
Code final statique public NON RECONNU
Constantes
public statique final int ABORTED_VALUE
The operation was aborted, typically due to a concurrency issue like sequencer check failures, transaction aborts, etc. See litmus test above for deciding between FAILED_PRECONDITION, ABORTED, and UNAVAILABLE.
ABORTED = 10;
Valeur constante : 10
public statique final int ALREADY_EXISTS_VALUE
Some entity that we attempted to create (e.g., file or directory) already exists.
ALREADY_EXISTS = 6;
Valeur constante : 6
public statique final int CANCELLED_VALUE
The operation was cancelled (typically by the caller).
CANCELLED = 1;
Valeur constante : 1
public statique final int DATA_LOSS_VALUE
Unrecoverable data loss or corruption.
DATA_LOSS = 15;
Valeur constante : 15
public statique final int DEADLINE_EXCEEDED_VALUE
Deadline expired before operation could complete. For operations that change the state of the system, this error may be returned even if the operation has completed successfully. For example, a successful response from a server could have been delayed long enough for the deadline to expire.
DEADLINE_EXCEEDED = 4;
Valeur constante : 4
public static final int DO_NOT_USE_RESERVED_FOR_FUTURE_EXPANSION_USE_DEFAULT_IN_SWITCH_INSTEAD__VALUE
An extra enum entry to prevent people from writing code that fails to compile when a new code is added. Nobody should ever reference this enumeration entry. In particular, if you write C++ code that switches on this enumeration, add a default: case instead of a case that mentions this enumeration entry. Nobody should rely on the value (currently 20) listed here. It may change in the future.
DO_NOT_USE_RESERVED_FOR_FUTURE_EXPANSION_USE_DEFAULT_IN_SWITCH_INSTEAD_ = 20;
Valeur constante : 20
public statique final int FAILED_PRECONDITION_VALUE
Operation was rejected because the system is not in a state required for the operation's execution. For example, directory to be deleted may be non-empty, an rmdir operation is applied to a non-directory, etc. A litmus test that may help a service implementor in deciding between FAILED_PRECONDITION, ABORTED, and UNAVAILABLE: (a) Use UNAVAILABLE if the client can retry just the failing call. (b) Use ABORTED if the client should retry at a higher-level (e.g., restarting a read-modify-write sequence). (c) Use FAILED_PRECONDITION if the client should not retry until the system state has been explicitly fixed. E.g., if an "rmdir" fails because the directory is non-empty, FAILED_PRECONDITION should be returned since the client should not retry unless they have first fixed up the directory by deleting files from it. (d) Use FAILED_PRECONDITION if the client performs conditional REST Get/Update/Delete on a resource and the resource on the server does not match the condition. E.g., conflicting read-modify-write on the same resource.
FAILED_PRECONDITION = 9;
Valeur constante : 9
public statique final int INTERNAL_VALUE
Internal errors. Means some invariant expected by the underlying system has been broken. If you see one of these errors, something is very broken.
INTERNAL = 13;
Valeur constante : 13
public statique final int INVALID_ARGUMENT_VALUE
Client specified an invalid argument. Note that this differs from FAILED_PRECONDITION. INVALID_ARGUMENT indicates arguments that are problematic regardless of the state of the system (e.g., a malformed file name).
INVALID_ARGUMENT = 3;
Valeur constante : 3
public statique final int NOT_FOUND_VALUE
Some requested entity (e.g., file or directory) was not found. For privacy reasons, this code *may* be returned when the client does not have the access right to the entity.
NOT_FOUND = 5;
Valeur constante : 5
public statique final int OK_VALUE
Not an error; returned on success
OK = 0;
Valeur constante : 0
public statique final int OUT_OF_RANGE_VALUE
Operation tried to iterate past the valid input range. E.g., seeking or reading past end of file. Unlike INVALID_ARGUMENT, this error indicates a problem that may be fixed if the system state changes. For example, a 32-bit file system will generate INVALID_ARGUMENT if asked to read at an offset that is not in the range [0,2^32-1], but it will generate OUT_OF_RANGE if asked to read from an offset past the current file size. There is a fair bit of overlap between FAILED_PRECONDITION and OUT_OF_RANGE. We recommend using OUT_OF_RANGE (the more specific error) when it applies so that callers who are iterating through a space can easily look for an OUT_OF_RANGE error to detect when they are done.
OUT_OF_RANGE = 11;
Valeur constante : 11
public statique final int PERMISSION_DENIED_VALUE
The caller does not have permission to execute the specified operation. PERMISSION_DENIED must not be used for rejections caused by exhausting some resource (use RESOURCE_EXHAUSTED instead for those errors). PERMISSION_DENIED must not be used if the caller can not be identified (use UNAUTHENTICATED instead for those errors).
PERMISSION_DENIED = 7;
Valeur constante : 7
public statique final int RESOURCE_EXHAUSTED_VALUE
Some resource has been exhausted, perhaps a per-user quota, or perhaps the entire file system is out of space.
RESOURCE_EXHAUSTED = 8;
Valeur constante : 8
public statique final int UNAUTHENTICATED_VALUE
The request does not have valid authentication credentials for the operation.
UNAUTHENTICATED = 16;
Valeur constante : 16
public statique final int UNAVAILABLE_VALUE
The service is currently unavailable. This is a most likely a transient condition and may be corrected by retrying with a backoff. See litmus test above for deciding between FAILED_PRECONDITION, ABORTED, and UNAVAILABLE.
UNAVAILABLE = 14;
Valeur constante : 14
public statique final int UNIMPLEMENTED_VALUE
Operation is not implemented or not supported/enabled in this service.
UNIMPLEMENTED = 12;
Valeur constante : 12
public statique final int UNKNOWN_VALUE
Unknown error. An example of where this error may be returned is if a Status value received from another address space belongs to an error-space that is not known in this address space. Also errors raised by APIs that do not return enough error information may be converted to this error.
UNKNOWN = 2;
Valeur constante : 2