Code

공개 최종 열거형 코드

 The canonical error codes for TensorFlow APIs.
 Warnings:
 -   Do not change any numeric assignments.
 -   Changes to this list should only be made if there is a compelling
     need that can't be satisfied in another way.  Such changes
     must be approved by at least two OWNERS.
 -   These error codes must match gRPC and protobuf error codes (except for
     DO_NOT_USE_RESERVED_FOR_FUTURE_EXPANSION_USE_DEFAULT_IN_SWITCH_INSTEAD_).
 Sometimes multiple error codes may apply.  Services should return
 the most specific error code that applies.  For example, prefer
 OUT_OF_RANGE over FAILED_PRECONDITION if both codes apply.
 Similarly prefer NOT_FOUND or ALREADY_EXISTS over FAILED_PRECONDITION.
Protobuf 열거형 tensorflow.error.Code

상수

정수 중단_VALUE 
 The operation was aborted, typically due to a concurrency issue
 like sequencer check failures, transaction aborts, etc.
정수 ALREADY_EXISTS_VALUE 
 Some entity that we attempted to create (e.g., file or directory)
 already exists.
정수 취소됨_VALUE 
 The operation was cancelled (typically by the caller).
정수 DATA_LOSS_VALUE 
 Unrecoverable data loss or corruption.
정수 DEADLINE_EXCEEDED_VALUE 
 Deadline expired before operation could complete.
정수 DO_NOT_USE_RESERVED_FOR_FUTURE_EXPANSION_USE_DEFAULT_IN_SWITCH_INSTEAD__VALUE 
 An extra enum entry to prevent people from writing code that
 fails to compile when a new code is added.
정수 FAILED_PRECONDITION_VALUE 
 Operation was rejected because the system is not in a state
 required for the operation's execution.
정수 INTERNAL_VALUE 
 Internal errors.
정수 INVALID_ARGUMENT_VALUE 
 Client specified an invalid argument.
정수 NOT_FOUND_VALUE 
 Some requested entity (e.g., file or directory) was not found.
정수 OK_VALUE 
 Not an error; returned on success
OK = 0;
정수 OUT_OF_RANGE_VALUE 
 Operation tried to iterate past the valid input range.
정수 PERMISSION_DENIED_VALUE 
 The caller does not have permission to execute the specified
 operation.
정수 RESOURCE_EXHAUSTED_VALUE 
 Some resource has been exhausted, perhaps a per-user quota, or
 perhaps the entire file system is out of space.
정수 인증되지 않은_VALUE 
 The request does not have valid authentication credentials for the
 operation.
정수 UNAVAILABLE_VALUE 
 The service is currently unavailable.
정수 UNIMPLEMENTED_VALUE 
 Operation is not implemented or not supported/enabled in this service.
정수 UNKNOWN_VALUE 
 Unknown error.

상속된 메서드

최종 정수
CompareTo ( 코드 arg0)
정수
CompareTo (객체 arg0)
최종 부울
같음 (개체 arg0)
최종 수업< 코드 >
getDeclaringClass ()
최종 정수
해시코드 ()
최종 문자열
이름 ()
최종 정수
서수 ()
끈
toString ()
static <T는 Enum<T>> T를 확장합니다.
valueOf (클래스<T> arg0, 문자열 arg1)
불리언
같음 (개체 arg0)
마지막 수업<?>
getClass ()
정수
해시코드 ()
최종 무효
알림 ()
최종 무효
통지모두 ()
끈
toString ()
최종 무효
대기 (long arg0, int arg1)
최종 무효
기다리세요 (긴 arg0)
최종 무효
기다리다 ()
추상 정수
CompareTo ( 코드 arg0)

열거형 값

공개 정적 최종 코드 중단됨

 The operation was aborted, typically due to a concurrency issue
 like sequencer check failures, transaction aborts, etc.
 See litmus test above for deciding between FAILED_PRECONDITION,
 ABORTED, and UNAVAILABLE.
ABORTED = 10;

공개 정적 최종 코드 ALREADY_EXISTS

 Some entity that we attempted to create (e.g., file or directory)
 already exists.
ALREADY_EXISTS = 6;

공개 정적 최종 코드가 취소되었습니다.

 The operation was cancelled (typically by the caller).
CANCELLED = 1;

공개 정적 최종 코드 DATA_LOSS

 Unrecoverable data loss or corruption.
DATA_LOSS = 15;

공개 정적 최종 코드 DEADLINE_EXCEEDED

 Deadline expired before operation could complete.  For operations
 that change the state of the system, this error may be returned
 even if the operation has completed successfully.  For example, a
 successful response from a server could have been delayed long
 enough for the deadline to expire.
DEADLINE_EXCEEDED = 4;

공개 정적 최종 코드 DO_NOT_USE_RESERVED_FOR_FUTURE_EXPANSION_USE_DEFAULT_IN_SWITCH_INSTEAD_

 An extra enum entry to prevent people from writing code that
 fails to compile when a new code is added.
 Nobody should ever reference this enumeration entry. In particular,
 if you write C++ code that switches on this enumeration, add a default:
 case instead of a case that mentions this enumeration entry.
 Nobody should rely on the value (currently 20) listed here.  It
 may change in the future.
DO_NOT_USE_RESERVED_FOR_FUTURE_EXPANSION_USE_DEFAULT_IN_SWITCH_INSTEAD_ = 20;

공개 정적 최종 코드 FAILED_PRECONDITION

 Operation was rejected because the system is not in a state
 required for the operation's execution.  For example, directory
 to be deleted may be non-empty, an rmdir operation is applied to
 a non-directory, etc.
 A litmus test that may help a service implementor in deciding
 between FAILED_PRECONDITION, ABORTED, and UNAVAILABLE:
  (a) Use UNAVAILABLE if the client can retry just the failing call.
  (b) Use ABORTED if the client should retry at a higher-level
      (e.g., restarting a read-modify-write sequence).
  (c) Use FAILED_PRECONDITION if the client should not retry until
      the system state has been explicitly fixed.  E.g., if an "rmdir"
      fails because the directory is non-empty, FAILED_PRECONDITION
      should be returned since the client should not retry unless
      they have first fixed up the directory by deleting files from it.
  (d) Use FAILED_PRECONDITION if the client performs conditional
      REST Get/Update/Delete on a resource and the resource on the
      server does not match the condition. E.g., conflicting
      read-modify-write on the same resource.
FAILED_PRECONDITION = 9;

공개 정적 최종 코드 내부

 Internal errors.  Means some invariant expected by the underlying
 system has been broken.  If you see one of these errors,
 something is very broken.
INTERNAL = 13;

공개 정적 최종 코드 INVALID_ARGUMENT

 Client specified an invalid argument.  Note that this differs
 from FAILED_PRECONDITION.  INVALID_ARGUMENT indicates arguments
 that are problematic regardless of the state of the system
 (e.g., a malformed file name).
INVALID_ARGUMENT = 3;

공개 정적 최종 코드 NOT_FOUND

 Some requested entity (e.g., file or directory) was not found.
 For privacy reasons, this code *may* be returned when the client
 does not have the access right to the entity.
NOT_FOUND = 5;

공개 정적 최종 코드 확인

 Not an error; returned on success
OK = 0;

공개 정적 최종 코드 OUT_OF_RANGE

 Operation tried to iterate past the valid input range.  E.g., seeking or
 reading past end of file.
 Unlike INVALID_ARGUMENT, this error indicates a problem that may
 be fixed if the system state changes. For example, a 32-bit file
 system will generate INVALID_ARGUMENT if asked to read at an
 offset that is not in the range [0,2^32-1], but it will generate
 OUT_OF_RANGE if asked to read from an offset past the current
 file size.
 There is a fair bit of overlap between FAILED_PRECONDITION and
 OUT_OF_RANGE.  We recommend using OUT_OF_RANGE (the more specific
 error) when it applies so that callers who are iterating through
 a space can easily look for an OUT_OF_RANGE error to detect when
 they are done.
OUT_OF_RANGE = 11;

공개 정적 최종 코드 PERMISSION_DENIED

 The caller does not have permission to execute the specified
 operation.  PERMISSION_DENIED must not be used for rejections
 caused by exhausting some resource (use RESOURCE_EXHAUSTED
 instead for those errors).  PERMISSION_DENIED must not be
 used if the caller can not be identified (use UNAUTHENTICATED
 instead for those errors).
PERMISSION_DENIED = 7;

공개 정적 최종 코드 RESOURCE_EXHAUSTED

 Some resource has been exhausted, perhaps a per-user quota, or
 perhaps the entire file system is out of space.
RESOURCE_EXHAUSTED = 8;

공개 정적 최종 코드 인증되지 않음

 The request does not have valid authentication credentials for the
 operation.
UNAUTHENTICATED = 16;

공개 정적 최종 코드를 사용할 수 없습니다.

 The service is currently unavailable.  This is a most likely a
 transient condition and may be corrected by retrying with
 a backoff.
 See litmus test above for deciding between FAILED_PRECONDITION,
 ABORTED, and UNAVAILABLE.
UNAVAILABLE = 14;

공개 정적 최종 코드가 구현되지 않음

 Operation is not implemented or not supported/enabled in this service.
UNIMPLEMENTED = 12;

공개 정적 최종 코드 UNKNOWN

 Unknown error.  An example of where this error may be returned is
 if a Status value received from another address space belongs to
 an error-space that is not known in this address space.  Also
 errors raised by APIs that do not return enough error information
 may be converted to this error.
UNKNOWN = 2;

공개 정적 최종 코드가 인식되지 않음

상수

공개 정적 최종 int ABORTED_VALUE

 The operation was aborted, typically due to a concurrency issue
 like sequencer check failures, transaction aborts, etc.
 See litmus test above for deciding between FAILED_PRECONDITION,
 ABORTED, and UNAVAILABLE.
ABORTED = 10;

상수값: 10

공개 정적 최종 int ALREADY_EXISTS_VALUE

 Some entity that we attempted to create (e.g., file or directory)
 already exists.
ALREADY_EXISTS = 6;

상수값: 6

공개 정적 최종 int CANCELLED_VALUE

 The operation was cancelled (typically by the caller).
CANCELLED = 1;

상수값: 1

공개 정적 최종 int DATA_LOSS_VALUE

 Unrecoverable data loss or corruption.
DATA_LOSS = 15;

상수값: 15

공개 정적 최종 int DEADLINE_EXCEEDED_VALUE

 Deadline expired before operation could complete.  For operations
 that change the state of the system, this error may be returned
 even if the operation has completed successfully.  For example, a
 successful response from a server could have been delayed long
 enough for the deadline to expire.
DEADLINE_EXCEEDED = 4;

상수값: 4

공개 정적 최종 int DO_NOT_USE_RESERVED_FOR_FUTURE_EXPANSION_USE_DEFAULT_IN_SWITCH_INSTEAD__VALUE

 An extra enum entry to prevent people from writing code that
 fails to compile when a new code is added.
 Nobody should ever reference this enumeration entry. In particular,
 if you write C++ code that switches on this enumeration, add a default:
 case instead of a case that mentions this enumeration entry.
 Nobody should rely on the value (currently 20) listed here.  It
 may change in the future.
DO_NOT_USE_RESERVED_FOR_FUTURE_EXPANSION_USE_DEFAULT_IN_SWITCH_INSTEAD_ = 20;

상수값: 20

공개 정적 최종 int FAILED_PRECONDITION_VALUE

 Operation was rejected because the system is not in a state
 required for the operation's execution.  For example, directory
 to be deleted may be non-empty, an rmdir operation is applied to
 a non-directory, etc.
 A litmus test that may help a service implementor in deciding
 between FAILED_PRECONDITION, ABORTED, and UNAVAILABLE:
  (a) Use UNAVAILABLE if the client can retry just the failing call.
  (b) Use ABORTED if the client should retry at a higher-level
      (e.g., restarting a read-modify-write sequence).
  (c) Use FAILED_PRECONDITION if the client should not retry until
      the system state has been explicitly fixed.  E.g., if an "rmdir"
      fails because the directory is non-empty, FAILED_PRECONDITION
      should be returned since the client should not retry unless
      they have first fixed up the directory by deleting files from it.
  (d) Use FAILED_PRECONDITION if the client performs conditional
      REST Get/Update/Delete on a resource and the resource on the
      server does not match the condition. E.g., conflicting
      read-modify-write on the same resource.
FAILED_PRECONDITION = 9;

상수값: 9

공개 정적 최종 int INTERNAL_VALUE

 Internal errors.  Means some invariant expected by the underlying
 system has been broken.  If you see one of these errors,
 something is very broken.
INTERNAL = 13;

상수값: 13

공개 정적 최종 int INVALID_ARGUMENT_VALUE

 Client specified an invalid argument.  Note that this differs
 from FAILED_PRECONDITION.  INVALID_ARGUMENT indicates arguments
 that are problematic regardless of the state of the system
 (e.g., a malformed file name).
INVALID_ARGUMENT = 3;

상수값: 3

공개 정적 최종 int NOT_FOUND_VALUE

 Some requested entity (e.g., file or directory) was not found.
 For privacy reasons, this code *may* be returned when the client
 does not have the access right to the entity.
NOT_FOUND = 5;

상수값: 5

공개 정적 최종 int OK_VALUE

 Not an error; returned on success
OK = 0;

상수값: 0

공개 정적 최종 int OUT_OF_RANGE_VALUE

 Operation tried to iterate past the valid input range.  E.g., seeking or
 reading past end of file.
 Unlike INVALID_ARGUMENT, this error indicates a problem that may
 be fixed if the system state changes. For example, a 32-bit file
 system will generate INVALID_ARGUMENT if asked to read at an
 offset that is not in the range [0,2^32-1], but it will generate
 OUT_OF_RANGE if asked to read from an offset past the current
 file size.
 There is a fair bit of overlap between FAILED_PRECONDITION and
 OUT_OF_RANGE.  We recommend using OUT_OF_RANGE (the more specific
 error) when it applies so that callers who are iterating through
 a space can easily look for an OUT_OF_RANGE error to detect when
 they are done.
OUT_OF_RANGE = 11;

상수값: 11

공개 정적 최종 int PERMISSION_DENIED_VALUE

 The caller does not have permission to execute the specified
 operation.  PERMISSION_DENIED must not be used for rejections
 caused by exhausting some resource (use RESOURCE_EXHAUSTED
 instead for those errors).  PERMISSION_DENIED must not be
 used if the caller can not be identified (use UNAUTHENTICATED
 instead for those errors).
PERMISSION_DENIED = 7;

상수값: 7

공개 정적 최종 int RESOURCE_EXHAUSTED_VALUE

 Some resource has been exhausted, perhaps a per-user quota, or
 perhaps the entire file system is out of space.
RESOURCE_EXHAUSTED = 8;

상수값: 8

공개 정적 최종 int UNAUTHENTICATED_VALUE

 The request does not have valid authentication credentials for the
 operation.
UNAUTHENTICATED = 16;

상수값: 16

공개 정적 최종 int UNAVAILABLE_VALUE

 The service is currently unavailable.  This is a most likely a
 transient condition and may be corrected by retrying with
 a backoff.
 See litmus test above for deciding between FAILED_PRECONDITION,
 ABORTED, and UNAVAILABLE.
UNAVAILABLE = 14;

상수값: 14

공개 정적 최종 int UNIMPLEMENTED_VALUE

 Operation is not implemented or not supported/enabled in this service.
UNIMPLEMENTED = 12;

상수값: 12

공개 정적 최종 int UNKNOWN_VALUE

 Unknown error.  An example of where this error may be returned is
 if a Status value received from another address space belongs to
 an error-space that is not known in this address space.  Also
 errors raised by APIs that do not return enough error information
 may be converted to this error.
UNKNOWN = 2;

상수값: 2