DebugTensorWatch.Builder

lớp cuối cùng tĩnh công khai DebugTensorWatch.Builder

 Option for watching a node in TensorFlow Debugger (tfdbg).
 

Loại tensorflow.DebugTensorWatch

Phương pháp công khai

Gỡ lỗiTensorWatch.Builder	addAllDebugOps (giá trị Iterable<String>) Name(s) of the debugging op(s).
Gỡ lỗiTensorWatch.Builder	addAllDebugUrls (giá trị Iterable<String>) URL(s) for debug targets(s).
Gỡ lỗiTensorWatch.Builder	addDebugOps (Giá trị chuỗi) Name(s) of the debugging op(s).
Gỡ lỗiTensorWatch.Builder	addDebugOpsBytes (giá trị com.google.protobuf.ByteString) Name(s) of the debugging op(s).
Gỡ lỗiTensorWatch.Builder	addDebugUrls (Giá trị chuỗi) URL(s) for debug targets(s).
Gỡ lỗiTensorWatch.Builder	addDebugUrlsBytes (giá trị com.google.protobuf.ByteString) URL(s) for debug targets(s).
Gỡ lỗiTensorWatch.Builder	addRepeatedField (trường com.google.protobuf.Descriptors.FieldDescriptor, Giá trị đối tượng)
Gỡ lỗi TensorWatch	xây dựng ()
Gỡ lỗi TensorWatch	xây dựngMột phần ()
Gỡ lỗiTensorWatch.Builder	thông thoáng ()
Gỡ lỗiTensorWatch.Builder	clearDebugOps () Name(s) of the debugging op(s).
Gỡ lỗiTensorWatch.Builder	clearDebugUrl () URL(s) for debug targets(s).
Gỡ lỗiTensorWatch.Builder	ClearField (trường com.google.protobuf.Descriptors.FieldDescriptor)
Gỡ lỗiTensorWatch.Builder	clearNodeName () Name of the node to watch.
Gỡ lỗiTensorWatch.Builder	clearOneof (com.google.protobuf.Descriptors.OneofDescriptor oneof)
Gỡ lỗiTensorWatch.Builder	ClearOutputSlot () Output slot to watch.
Gỡ lỗiTensorWatch.Builder	clearTolerateDebugOpCreationFailures () Do not error out if debug op creation fails (e.g., due to dtype incompatibility).
Gỡ lỗiTensorWatch.Builder	dòng vô tính ()
Sợi dây	getDebugOps (chỉ mục int) Name(s) of the debugging op(s).
com.google.protobuf.ByteString	getDebugOpsBytes (chỉ mục int) Name(s) of the debugging op(s).
int	getDebugOpsCount () Name(s) of the debugging op(s).
com.google.protobuf.ProtocolStringList	getDebugOpsList () Name(s) of the debugging op(s).
Sợi dây	getDebugUrls (chỉ mục int) URL(s) for debug targets(s).
com.google.protobuf.ByteString	getDebugUrlsBytes (chỉ mục int) URL(s) for debug targets(s).
int	getDebugUrlsCount () URL(s) for debug targets(s).
com.google.protobuf.ProtocolStringList	getDebugUrlsList () URL(s) for debug targets(s).
Gỡ lỗi TensorWatch	getDefaultInstanceForType ()
com.google.protobuf.Descriptors.Descriptor tĩnh cuối cùng	getDescriptor ()
com.google.protobuf.Descriptors.Descriptor	getDescriptorForType ()
Sợi dây	getNodeName () Name of the node to watch.
com.google.protobuf.ByteString	getNodeNameBytes () Name of the node to watch.
int	getOutputSlot () Output slot to watch.
boolean	getTolerateDebugOpCreationFailures () Do not error out if debug op creation fails (e.g., due to dtype incompatibility).
boolean cuối cùng	được khởi tạo ()
Gỡ lỗiTensorWatch.Builder	mergeFrom (đầu vào com.google.protobuf.CodedInputStream, com.google.protobuf.ExtensionRegistryLite ExtensionRegistry)
Gỡ lỗiTensorWatch.Builder	mergeFrom (com.google.protobuf.Message other)
DebugTensorWatch.Builder cuối cùng	hợp nhấtUnknownFields (com.google.protobuf.UnknownFieldSet knownFields)
Gỡ lỗiTensorWatch.Builder	setDebugOps (chỉ mục int, giá trị chuỗi) Name(s) of the debugging op(s).
Gỡ lỗiTensorWatch.Builder	setDebugUrls (chỉ mục int, giá trị chuỗi) URL(s) for debug targets(s).
Gỡ lỗiTensorWatch.Builder	setField (trường com.google.protobuf.Descriptors.FieldDescriptor, Giá trị đối tượng)
Gỡ lỗiTensorWatch.Builder	setNodeName (Giá trị chuỗi) Name of the node to watch.
Gỡ lỗiTensorWatch.Builder	setNodeNameBytes (giá trị com.google.protobuf.ByteString) Name of the node to watch.
Gỡ lỗiTensorWatch.Builder	setOutputSlot (giá trị int) Output slot to watch.
Gỡ lỗiTensorWatch.Builder	setRepeatedField (trường com.google.protobuf.Descriptors.FieldDescriptor, chỉ mục int, giá trị đối tượng)
Gỡ lỗiTensorWatch.Builder	setTolerateDebugOpCreationFailures (giá trị boolean) Do not error out if debug op creation fails (e.g., due to dtype incompatibility).
DebugTensorWatch.Builder cuối cùng	setUnknownFields (com.google.protobuf.UnknownFieldSet knownFields)

Phương pháp kế thừa

Từ lớp java.lang.Object

boolean	bằng (Đối tượng arg0)
Lớp cuối cùng<?>	getClass ()
int	Mã Băm ()
khoảng trống cuối cùng	thông báo ()
khoảng trống cuối cùng	thông báoTất cả ()
Sợi dây	toString ()
khoảng trống cuối cùng	chờ đã (arg0 dài, int arg1)
khoảng trống cuối cùng	chờ đã (arg0 dài)
khoảng trống cuối cùng	Chờ đợi ()

Từ giao diện org.tensorflow.proto.framework.DebugTensorWatchOrBuilder

chuỗi trừu tượng	getDebugOps (chỉ mục int) Name(s) of the debugging op(s).
tóm tắt com.google.protobuf.ByteString	getDebugOpsBytes (chỉ mục int) Name(s) of the debugging op(s).
int trừu tượng	getDebugOpsCount () Name(s) of the debugging op(s).
Danh sách trừu tượng<String>	getDebugOpsList () Name(s) of the debugging op(s).
chuỗi trừu tượng	getDebugUrls (chỉ mục int) URL(s) for debug targets(s).
tóm tắt com.google.protobuf.ByteString	getDebugUrlsBytes (chỉ mục int) URL(s) for debug targets(s).
int trừu tượng	getDebugUrlsCount () URL(s) for debug targets(s).
Danh sách trừu tượng<String>	getDebugUrlsList () URL(s) for debug targets(s).
chuỗi trừu tượng	getNodeName () Name of the node to watch.
tóm tắt com.google.protobuf.ByteString	getNodeNameBytes () Name of the node to watch.
int trừu tượng	getOutputSlot () Output slot to watch.
trừu tượng boolean	getTolerateDebugOpCreationFailures () Do not error out if debug op creation fails (e.g., due to dtype incompatibility).

Phương pháp công khai

public DebugTensorWatch.Builder addAllDebugOps (giá trị Iterable<String>)

 Name(s) of the debugging op(s).
 One or more than one probes on a tensor.
 e.g., {"DebugIdentity", "DebugNanCount"}
 

repeated string debug_ops = 3;

public DebugTensorWatch.Builder addAllDebugUrls (giá trị Iterable<String>)

 URL(s) for debug targets(s).
 Supported URL formats are:
   - file:///foo/tfdbg_dump: Writes out Event content to file
     /foo/tfdbg_dump.  Assumes all directories can be created if they don't
     already exist.
   - grpc://localhost:11011: Sends an RPC request to an EventListener
     service running at localhost:11011 with the event.
   - memcbk:///event_key: Routes tensors to clients using the
     callback registered with the DebugCallbackRegistry for event_key.
 Each debug op listed in debug_ops will publish its output tensor (debug
 signal) to all URLs in debug_urls.
 N.B. Session::Run() supports concurrent invocations of the same inputs
 (feed keys), outputs and target nodes. If such concurrent invocations
 are to be debugged, the callers of Session::Run() must use distinct
 debug_urls to make sure that the streamed or dumped events do not overlap
 among the invocations.
 TODO(cais): More visible documentation of this in g3docs.
 

repeated string debug_urls = 4;

public DebugTensorWatch.Builder addDebugOps (Giá trị chuỗi)

 Name(s) of the debugging op(s).
 One or more than one probes on a tensor.
 e.g., {"DebugIdentity", "DebugNanCount"}
 

repeated string debug_ops = 3;

Debug công khaiTensorWatch.Builder addDebugOpsBytes (giá trị com.google.protobuf.ByteString)

 Name(s) of the debugging op(s).
 One or more than one probes on a tensor.
 e.g., {"DebugIdentity", "DebugNanCount"}
 

repeated string debug_ops = 3;

public DebugTensorWatch.Builder addDebugUrls (Giá trị chuỗi)

 URL(s) for debug targets(s).
 Supported URL formats are:
   - file:///foo/tfdbg_dump: Writes out Event content to file
     /foo/tfdbg_dump.  Assumes all directories can be created if they don't
     already exist.
   - grpc://localhost:11011: Sends an RPC request to an EventListener
     service running at localhost:11011 with the event.
   - memcbk:///event_key: Routes tensors to clients using the
     callback registered with the DebugCallbackRegistry for event_key.
 Each debug op listed in debug_ops will publish its output tensor (debug
 signal) to all URLs in debug_urls.
 N.B. Session::Run() supports concurrent invocations of the same inputs
 (feed keys), outputs and target nodes. If such concurrent invocations
 are to be debugged, the callers of Session::Run() must use distinct
 debug_urls to make sure that the streamed or dumped events do not overlap
 among the invocations.
 TODO(cais): More visible documentation of this in g3docs.
 

repeated string debug_urls = 4;

public DebugTensorWatch.Builder addDebugUrlsBytes (giá trị com.google.protobuf.ByteString)

 URL(s) for debug targets(s).
 Supported URL formats are:
   - file:///foo/tfdbg_dump: Writes out Event content to file
     /foo/tfdbg_dump.  Assumes all directories can be created if they don't
     already exist.
   - grpc://localhost:11011: Sends an RPC request to an EventListener
     service running at localhost:11011 with the event.
   - memcbk:///event_key: Routes tensors to clients using the
     callback registered with the DebugCallbackRegistry for event_key.
 Each debug op listed in debug_ops will publish its output tensor (debug
 signal) to all URLs in debug_urls.
 N.B. Session::Run() supports concurrent invocations of the same inputs
 (feed keys), outputs and target nodes. If such concurrent invocations
 are to be debugged, the callers of Session::Run() must use distinct
 debug_urls to make sure that the streamed or dumped events do not overlap
 among the invocations.
 TODO(cais): More visible documentation of this in g3docs.
 

repeated string debug_urls = 4;

public DebugTensorWatch.Builder addRepeatedField (trường com.google.protobuf.Descriptors.FieldDescriptor, Giá trị đối tượng)

Bản dựng DebugTensorWatch công khai ()

public DebugTensorWatch buildPartial ()

DebugTensorWatch.Builder công khai rõ ràng ()

Debug công khaiTensorWatch.Builder clearDebugOps ()

 Name(s) of the debugging op(s).
 One or more than one probes on a tensor.
 e.g., {"DebugIdentity", "DebugNanCount"}
 

repeated string debug_ops = 3;

DebugTensorWatch.Builder clearDebugUrls ()

 URL(s) for debug targets(s).
 Supported URL formats are:
   - file:///foo/tfdbg_dump: Writes out Event content to file
     /foo/tfdbg_dump.  Assumes all directories can be created if they don't
     already exist.
   - grpc://localhost:11011: Sends an RPC request to an EventListener
     service running at localhost:11011 with the event.
   - memcbk:///event_key: Routes tensors to clients using the
     callback registered with the DebugCallbackRegistry for event_key.
 Each debug op listed in debug_ops will publish its output tensor (debug
 signal) to all URLs in debug_urls.
 N.B. Session::Run() supports concurrent invocations of the same inputs
 (feed keys), outputs and target nodes. If such concurrent invocations
 are to be debugged, the callers of Session::Run() must use distinct
 debug_urls to make sure that the streamed or dumped events do not overlap
 among the invocations.
 TODO(cais): More visible documentation of this in g3docs.
 

repeated string debug_urls = 4;

public DebugTensorWatch.Builder clearField (trường com.google.protobuf.Descriptors.FieldDescriptor)

DebugTensorWatch.Builder clearNodeName () công khai

 Name of the node to watch.
 Use "*" for wildcard. But note: currently, regex is not supported in
 general.
 

string node_name = 1;

Debug công khaiTensorWatch.Builder clearOneof (com.google.protobuf.Descriptors.OneofDescriptor oneof)

DebugTensorWatch.Builder clearOutputSlot ()

 Output slot to watch.
 The semantics of output_slot == -1 is that all outputs of the node
 will be watched (i.e., a wildcard).
 Other negative values of output_slot are invalid and will lead to
 errors currently.
 

int32 output_slot = 2;

Debug công khaiTensorWatch.Builder clearTolerateDebugOpCreationFailures ()

 Do not error out if debug op creation fails (e.g., due to dtype
 incompatibility). Instead, just log the failure.
 

bool tolerate_debug_op_creation_failures = 5;

bản sao DebugTensorWatch.Builder công khai ()

Chuỗi công khai getDebugOps (chỉ mục int)

 Name(s) of the debugging op(s).
 One or more than one probes on a tensor.
 e.g., {"DebugIdentity", "DebugNanCount"}
 

repeated string debug_ops = 3;

com.google.protobuf.ByteString getDebugOpsBytes công khai (chỉ mục int)

 Name(s) of the debugging op(s).
 One or more than one probes on a tensor.
 e.g., {"DebugIdentity", "DebugNanCount"}
 

repeated string debug_ops = 3;

int công khai getDebugOpsCount ()

 Name(s) of the debugging op(s).
 One or more than one probes on a tensor.
 e.g., {"DebugIdentity", "DebugNanCount"}
 

repeated string debug_ops = 3;

com.google.protobuf.ProtocolStringList công khai getDebugOpsList ()

 Name(s) of the debugging op(s).
 One or more than one probes on a tensor.
 e.g., {"DebugIdentity", "DebugNanCount"}
 

repeated string debug_ops = 3;

Chuỗi công khai getDebugUrls (chỉ mục int)

 URL(s) for debug targets(s).
 Supported URL formats are:
   - file:///foo/tfdbg_dump: Writes out Event content to file
     /foo/tfdbg_dump.  Assumes all directories can be created if they don't
     already exist.
   - grpc://localhost:11011: Sends an RPC request to an EventListener
     service running at localhost:11011 with the event.
   - memcbk:///event_key: Routes tensors to clients using the
     callback registered with the DebugCallbackRegistry for event_key.
 Each debug op listed in debug_ops will publish its output tensor (debug
 signal) to all URLs in debug_urls.
 N.B. Session::Run() supports concurrent invocations of the same inputs
 (feed keys), outputs and target nodes. If such concurrent invocations
 are to be debugged, the callers of Session::Run() must use distinct
 debug_urls to make sure that the streamed or dumped events do not overlap
 among the invocations.
 TODO(cais): More visible documentation of this in g3docs.
 

repeated string debug_urls = 4;

công khai com.google.protobuf.ByteString getDebugUrlsBytes (chỉ mục int)

 URL(s) for debug targets(s).
 Supported URL formats are:
   - file:///foo/tfdbg_dump: Writes out Event content to file
     /foo/tfdbg_dump.  Assumes all directories can be created if they don't
     already exist.
   - grpc://localhost:11011: Sends an RPC request to an EventListener
     service running at localhost:11011 with the event.
   - memcbk:///event_key: Routes tensors to clients using the
     callback registered with the DebugCallbackRegistry for event_key.
 Each debug op listed in debug_ops will publish its output tensor (debug
 signal) to all URLs in debug_urls.
 N.B. Session::Run() supports concurrent invocations of the same inputs
 (feed keys), outputs and target nodes. If such concurrent invocations
 are to be debugged, the callers of Session::Run() must use distinct
 debug_urls to make sure that the streamed or dumped events do not overlap
 among the invocations.
 TODO(cais): More visible documentation of this in g3docs.
 

repeated string debug_urls = 4;

int công khai getDebugUrlsCount ()

 URL(s) for debug targets(s).
 Supported URL formats are:
   - file:///foo/tfdbg_dump: Writes out Event content to file
     /foo/tfdbg_dump.  Assumes all directories can be created if they don't
     already exist.
   - grpc://localhost:11011: Sends an RPC request to an EventListener
     service running at localhost:11011 with the event.
   - memcbk:///event_key: Routes tensors to clients using the
     callback registered with the DebugCallbackRegistry for event_key.
 Each debug op listed in debug_ops will publish its output tensor (debug
 signal) to all URLs in debug_urls.
 N.B. Session::Run() supports concurrent invocations of the same inputs
 (feed keys), outputs and target nodes. If such concurrent invocations
 are to be debugged, the callers of Session::Run() must use distinct
 debug_urls to make sure that the streamed or dumped events do not overlap
 among the invocations.
 TODO(cais): More visible documentation of this in g3docs.
 

repeated string debug_urls = 4;

com.google.protobuf.ProtocolStringList công khai getDebugUrlsList ()

 URL(s) for debug targets(s).
 Supported URL formats are:
   - file:///foo/tfdbg_dump: Writes out Event content to file
     /foo/tfdbg_dump.  Assumes all directories can be created if they don't
     already exist.
   - grpc://localhost:11011: Sends an RPC request to an EventListener
     service running at localhost:11011 with the event.
   - memcbk:///event_key: Routes tensors to clients using the
     callback registered with the DebugCallbackRegistry for event_key.
 Each debug op listed in debug_ops will publish its output tensor (debug
 signal) to all URLs in debug_urls.
 N.B. Session::Run() supports concurrent invocations of the same inputs
 (feed keys), outputs and target nodes. If such concurrent invocations
 are to be debugged, the callers of Session::Run() must use distinct
 debug_urls to make sure that the streamed or dumped events do not overlap
 among the invocations.
 TODO(cais): More visible documentation of this in g3docs.
 

repeated string debug_urls = 4;

công khai DebugTensorWatch getDefaultInstanceForType ()

công khai tĩnh cuối cùng com.google.protobuf.Descriptors.Descriptor getDescriptor ()

com.google.protobuf.Descriptors.Descriptor công khai getDescriptorForType ()

Chuỗi công khai getNodeName ()

 Name of the node to watch.
 Use "*" for wildcard. But note: currently, regex is not supported in
 general.
 

string node_name = 1;

com.google.protobuf.ByteString getNodeNameBytes () công khai

 Name of the node to watch.
 Use "*" for wildcard. But note: currently, regex is not supported in
 general.
 

string node_name = 1;

int công khai getOutputSlot ()

 Output slot to watch.
 The semantics of output_slot == -1 is that all outputs of the node
 will be watched (i.e., a wildcard).
 Other negative values of output_slot are invalid and will lead to
 errors currently.
 

int32 output_slot = 2;

boolean công khai getTolerateDebugOpCreationFailures ()

 Do not error out if debug op creation fails (e.g., due to dtype
 incompatibility). Instead, just log the failure.
 

bool tolerate_debug_op_creation_failures = 5;

boolean cuối cùng công khai được khởi tạo ()

Debug công khaiTensorWatch.Builder mergeFrom (đầu vào com.google.protobuf.CodedInputStream, com.google.protobuf.ExtensionRegistryLite ExtensionRegistry)

Ném

IOException

Debug công khaiTensorWatch.Builder mergeFrom (com.google.protobuf.Message other)

trận chung kết công khai DebugTensorWatch.Builder mergeUnknownFields (com.google.protobuf.UnknownFieldSet knownFields)

public DebugTensorWatch.Builder setDebugOps (chỉ mục int, giá trị chuỗi)

 Name(s) of the debugging op(s).
 One or more than one probes on a tensor.
 e.g., {"DebugIdentity", "DebugNanCount"}
 

repeated string debug_ops = 3;

public DebugTensorWatch.Builder setDebugUrls (chỉ mục int, giá trị chuỗi)

 URL(s) for debug targets(s).
 Supported URL formats are:
   - file:///foo/tfdbg_dump: Writes out Event content to file
     /foo/tfdbg_dump.  Assumes all directories can be created if they don't
     already exist.
   - grpc://localhost:11011: Sends an RPC request to an EventListener
     service running at localhost:11011 with the event.
   - memcbk:///event_key: Routes tensors to clients using the
     callback registered with the DebugCallbackRegistry for event_key.
 Each debug op listed in debug_ops will publish its output tensor (debug
 signal) to all URLs in debug_urls.
 N.B. Session::Run() supports concurrent invocations of the same inputs
 (feed keys), outputs and target nodes. If such concurrent invocations
 are to be debugged, the callers of Session::Run() must use distinct
 debug_urls to make sure that the streamed or dumped events do not overlap
 among the invocations.
 TODO(cais): More visible documentation of this in g3docs.
 

repeated string debug_urls = 4;

public DebugTensorWatch.Builder setField (trường com.google.protobuf.Descriptors.FieldDescriptor, Giá trị đối tượng)

public DebugTensorWatch.Builder setNodeName (Giá trị chuỗi)

 Name of the node to watch.
 Use "*" for wildcard. But note: currently, regex is not supported in
 general.
 

string node_name = 1;

public DebugTensorWatch.Builder setNodeNameBytes (giá trị com.google.protobuf.ByteString)

 Name of the node to watch.
 Use "*" for wildcard. But note: currently, regex is not supported in
 general.
 

string node_name = 1;

public DebugTensorWatch.Builder setOutputSlot (giá trị int)

 Output slot to watch.
 The semantics of output_slot == -1 is that all outputs of the node
 will be watched (i.e., a wildcard).
 Other negative values of output_slot are invalid and will lead to
 errors currently.
 

int32 output_slot = 2;

public DebugTensorWatch.Builder setRepeatedField (trường com.google.protobuf.Descriptors.FieldDescriptor, chỉ mục int, giá trị đối tượng)

public DebugTensorWatch.Builder setTolerateDebugOpCreationFailures (giá trị boolean)

 Do not error out if debug op creation fails (e.g., due to dtype
 incompatibility). Instead, just log the failure.
 

bool tolerate_debug_op_creation_failures = 5;

trận chung kết công khai DebugTensorWatch.Builder setUnknownFields (com.google.protobuf.UnknownFieldSet knownFields)