DebugTensorWatchOrBuilder

giao diện công cộng DebugTensorWatchOrBuilder

Các lớp con gián tiếp đã biết

DebugTensorWatch , DebugTensorWatch.Builder

Phương pháp công khai

chuỗi trừu tượng	getDebugOps (chỉ mục int) Name(s) of the debugging op(s).
tóm tắt com.google.protobuf.ByteString	getDebugOpsBytes (chỉ mục int) Name(s) of the debugging op(s).
int trừu tượng	getDebugOpsCount () Name(s) of the debugging op(s).
Danh sách trừu tượng<String>	getDebugOpsList () Name(s) of the debugging op(s).
chuỗi trừu tượng	getDebugUrls (chỉ mục int) URL(s) for debug targets(s).
tóm tắt com.google.protobuf.ByteString	getDebugUrlsBytes (chỉ mục int) URL(s) for debug targets(s).
int trừu tượng	getDebugUrlsCount () URL(s) for debug targets(s).
Danh sách trừu tượng<String>	getDebugUrlsList () URL(s) for debug targets(s).
chuỗi trừu tượng	getNodeName () Name of the node to watch.
tóm tắt com.google.protobuf.ByteString	getNodeNameBytes () Name of the node to watch.
int trừu tượng	getOutputSlot () Output slot to watch.
trừu tượng boolean	getTolerateDebugOpCreationFailures () Do not error out if debug op creation fails (e.g., due to dtype incompatibility).

Phương pháp công khai

Chuỗi trừu tượng công khai getDebugOps (chỉ mục int)

 Name(s) of the debugging op(s).
 One or more than one probes on a tensor.
 e.g., {"DebugIdentity", "DebugNanCount"}

repeated string debug_ops = 3;

tóm tắt công khai com.google.protobuf.ByteString getDebugOpsBytes (chỉ mục int)

 Name(s) of the debugging op(s).
 One or more than one probes on a tensor.
 e.g., {"DebugIdentity", "DebugNanCount"}

repeated string debug_ops = 3;

tóm tắt công khai int getDebugOpsCount ()

 Name(s) of the debugging op(s).
 One or more than one probes on a tensor.
 e.g., {"DebugIdentity", "DebugNanCount"}

repeated string debug_ops = 3;

Danh sách tóm tắt công khai<String> getDebugOpsList ()

 Name(s) of the debugging op(s).
 One or more than one probes on a tensor.
 e.g., {"DebugIdentity", "DebugNanCount"}

repeated string debug_ops = 3;

Chuỗi tóm tắt công khai getDebugUrls (chỉ mục int)

 URL(s) for debug targets(s).
 Supported URL formats are:
   - file:///foo/tfdbg_dump: Writes out Event content to file
     /foo/tfdbg_dump.  Assumes all directories can be created if they don't
     already exist.
   - grpc://localhost:11011: Sends an RPC request to an EventListener
     service running at localhost:11011 with the event.
   - memcbk:///event_key: Routes tensors to clients using the
     callback registered with the DebugCallbackRegistry for event_key.
 Each debug op listed in debug_ops will publish its output tensor (debug
 signal) to all URLs in debug_urls.
 N.B. Session::Run() supports concurrent invocations of the same inputs
 (feed keys), outputs and target nodes. If such concurrent invocations
 are to be debugged, the callers of Session::Run() must use distinct
 debug_urls to make sure that the streamed or dumped events do not overlap
 among the invocations.
 TODO(cais): More visible documentation of this in g3docs.

repeated string debug_urls = 4;

tóm tắt công khai com.google.protobuf.ByteString getDebugUrlsBytes (chỉ mục int)

 URL(s) for debug targets(s).
 Supported URL formats are:
   - file:///foo/tfdbg_dump: Writes out Event content to file
     /foo/tfdbg_dump.  Assumes all directories can be created if they don't
     already exist.
   - grpc://localhost:11011: Sends an RPC request to an EventListener
     service running at localhost:11011 with the event.
   - memcbk:///event_key: Routes tensors to clients using the
     callback registered with the DebugCallbackRegistry for event_key.
 Each debug op listed in debug_ops will publish its output tensor (debug
 signal) to all URLs in debug_urls.
 N.B. Session::Run() supports concurrent invocations of the same inputs
 (feed keys), outputs and target nodes. If such concurrent invocations
 are to be debugged, the callers of Session::Run() must use distinct
 debug_urls to make sure that the streamed or dumped events do not overlap
 among the invocations.
 TODO(cais): More visible documentation of this in g3docs.

repeated string debug_urls = 4;

tóm tắt công khai int getDebugUrlsCount ()

 URL(s) for debug targets(s).
 Supported URL formats are:
   - file:///foo/tfdbg_dump: Writes out Event content to file
     /foo/tfdbg_dump.  Assumes all directories can be created if they don't
     already exist.
   - grpc://localhost:11011: Sends an RPC request to an EventListener
     service running at localhost:11011 with the event.
   - memcbk:///event_key: Routes tensors to clients using the
     callback registered with the DebugCallbackRegistry for event_key.
 Each debug op listed in debug_ops will publish its output tensor (debug
 signal) to all URLs in debug_urls.
 N.B. Session::Run() supports concurrent invocations of the same inputs
 (feed keys), outputs and target nodes. If such concurrent invocations
 are to be debugged, the callers of Session::Run() must use distinct
 debug_urls to make sure that the streamed or dumped events do not overlap
 among the invocations.
 TODO(cais): More visible documentation of this in g3docs.

repeated string debug_urls = 4;

Danh sách tóm tắt công khai<String> getDebugUrlsList ()

 URL(s) for debug targets(s).
 Supported URL formats are:
   - file:///foo/tfdbg_dump: Writes out Event content to file
     /foo/tfdbg_dump.  Assumes all directories can be created if they don't
     already exist.
   - grpc://localhost:11011: Sends an RPC request to an EventListener
     service running at localhost:11011 with the event.
   - memcbk:///event_key: Routes tensors to clients using the
     callback registered with the DebugCallbackRegistry for event_key.
 Each debug op listed in debug_ops will publish its output tensor (debug
 signal) to all URLs in debug_urls.
 N.B. Session::Run() supports concurrent invocations of the same inputs
 (feed keys), outputs and target nodes. If such concurrent invocations
 are to be debugged, the callers of Session::Run() must use distinct
 debug_urls to make sure that the streamed or dumped events do not overlap
 among the invocations.
 TODO(cais): More visible documentation of this in g3docs.

repeated string debug_urls = 4;

Chuỗi tóm tắt công khai getNodeName ()

 Name of the node to watch.
 Use "*" for wildcard. But note: currently, regex is not supported in
 general.

string node_name = 1;

tóm tắt công khai com.google.protobuf.ByteString getNodeNameBytes ()

 Name of the node to watch.
 Use "*" for wildcard. But note: currently, regex is not supported in
 general.

string node_name = 1;

tóm tắt công khai int getOutputSlot ()

 Output slot to watch.
 The semantics of output_slot == -1 is that all outputs of the node
 will be watched (i.e., a wildcard).
 Other negative values of output_slot are invalid and will lead to
 errors currently.

int32 output_slot = 2;

boolean trừu tượng công khai getTolerateDebugOpCreationFailures ()

 Do not error out if debug op creation fails (e.g., due to dtype
 incompatibility). Instead, just log the failure.

bool tolerate_debug_op_creation_failures = 5;