सार्वजनिक अंतिम एनम कोड
The canonical error codes for TensorFlow APIs.
Warnings:
- Do not change any numeric assignments.
- Changes to this list should only be made if there is a compelling
need that can't be satisfied in another way. Such changes
must be approved by at least two OWNERS.
- These error codes must match gRPC and protobuf error codes (except for
DO_NOT_USE_RESERVED_FOR_FUTURE_EXPANSION_USE_DEFAULT_IN_SWITCH_INSTEAD_).
Sometimes multiple error codes may apply. Services should return
the most specific error code that applies. For example, prefer
OUT_OF_RANGE over FAILED_PRECONDITION if both codes apply.
Similarly prefer NOT_FOUND or ALREADY_EXISTS over FAILED_PRECONDITION.
tensorflow.error.Code स्थिरांक
| int यहाँ | ABORTED_VALUE | The operation was aborted, typically due to a concurrency issue like sequencer check failures, transaction aborts, etc. |
| int यहाँ | पहले से ही_मौजूद_मान | Some entity that we attempted to create (e.g., file or directory) already exists. |
| int यहाँ | रद्द_मान | The operation was cancelled (typically by the caller). |
| int यहाँ | डेटा_LOSS_VALUE | Unrecoverable data loss or corruption. |
| int यहाँ | DEADLINE_EXCEEDED_VALUE | Deadline expired before operation could complete. |
| int यहाँ | भविष्य_के_लिए_विस्तार_उपयोग_डिफ़ॉल्ट_IN_SWITCH_INSTEAD__VALUE_नहीं_करें | An extra enum entry to prevent people from writing code that fails to compile when a new code is added. |
| int यहाँ | FAILED_PRECONDITION_VALUE | Operation was rejected because the system is not in a state required for the operation's execution. |
| int यहाँ | आंतरिक_मूल्य | Internal errors. |
| int यहाँ | INVALID_ARGUMENT_VALUE | Client specified an invalid argument. |
| int यहाँ | NOT_FOUND_VALUE | Some requested entity (e.g., file or directory) was not found. |
| int यहाँ | ठीक_मान | Not an error; returned on success OK = 0; |
| int यहाँ | OUT_OF_RANGE_VALUE | Operation tried to iterate past the valid input range. |
| int यहाँ | PERMISSION_DENIED_VALUE | The caller does not have permission to execute the specified operation. |
| int यहाँ | RESOURCE_EXHAUSTED_VALUE | Some resource has been exhausted, perhaps a per-user quota, or perhaps the entire file system is out of space. |
| int यहाँ | अप्रामाणिक_मूल्य | The request does not have valid authentication credentials for the operation. |
| int यहाँ | अनुपलब्ध_मूल्य | The service is currently unavailable. |
| int यहाँ | UNIMPLEMENTED_VALUE | Operation is not implemented or not supported/enabled in this service. |
| int यहाँ | अज्ञात_मूल्य | Unknown error. |
विरासत में मिली विधियाँ
एनम मान
सार्वजनिक स्थैतिक अंतिम कोड निरस्त किया गया
The operation was aborted, typically due to a concurrency issue like sequencer check failures, transaction aborts, etc. See litmus test above for deciding between FAILED_PRECONDITION, ABORTED, and UNAVAILABLE.
ABORTED = 10; सार्वजनिक स्थैतिक अंतिम कोड ALREADY_EXISTS
Some entity that we attempted to create (e.g., file or directory) already exists.
ALREADY_EXISTS = 6; सार्वजनिक स्थैतिक अंतिम कोड रद्द किया गया
The operation was cancelled (typically by the caller).
CANCELLED = 1; सार्वजनिक स्थैतिक अंतिम कोड DATA_LOSS
Unrecoverable data loss or corruption.
DATA_LOSS = 15; सार्वजनिक स्थैतिक अंतिम कोड DEADLINE_EXCEEDED
Deadline expired before operation could complete. For operations that change the state of the system, this error may be returned even if the operation has completed successfully. For example, a successful response from a server could have been delayed long enough for the deadline to expire.
DEADLINE_EXCEEDED = 4;सार्वजनिक स्थैतिक अंतिम कोड DO_NOT_USE_RESERVED_FOR_FUTURE_EXPANSION_USE_DEFAULT_IN_SWITCH_INSTEAD_
An extra enum entry to prevent people from writing code that fails to compile when a new code is added. Nobody should ever reference this enumeration entry. In particular, if you write C++ code that switches on this enumeration, add a default: case instead of a case that mentions this enumeration entry. Nobody should rely on the value (currently 20) listed here. It may change in the future.
DO_NOT_USE_RESERVED_FOR_FUTURE_EXPANSION_USE_DEFAULT_IN_SWITCH_INSTEAD_ = 20; सार्वजनिक स्थैतिक अंतिम कोड FAILED_PRECONDITION
Operation was rejected because the system is not in a state
required for the operation's execution. For example, directory
to be deleted may be non-empty, an rmdir operation is applied to
a non-directory, etc.
A litmus test that may help a service implementor in deciding
between FAILED_PRECONDITION, ABORTED, and UNAVAILABLE:
(a) Use UNAVAILABLE if the client can retry just the failing call.
(b) Use ABORTED if the client should retry at a higher-level
(e.g., restarting a read-modify-write sequence).
(c) Use FAILED_PRECONDITION if the client should not retry until
the system state has been explicitly fixed. E.g., if an "rmdir"
fails because the directory is non-empty, FAILED_PRECONDITION
should be returned since the client should not retry unless
they have first fixed up the directory by deleting files from it.
(d) Use FAILED_PRECONDITION if the client performs conditional
REST Get/Update/Delete on a resource and the resource on the
server does not match the condition. E.g., conflicting
read-modify-write on the same resource.
FAILED_PRECONDITION = 9; सार्वजनिक स्थैतिक अंतिम कोड आंतरिक
Internal errors. Means some invariant expected by the underlying system has been broken. If you see one of these errors, something is very broken.
INTERNAL = 13; सार्वजनिक स्थैतिक अंतिम कोड INVALID_ARGUMENT
Client specified an invalid argument. Note that this differs from FAILED_PRECONDITION. INVALID_ARGUMENT indicates arguments that are problematic regardless of the state of the system (e.g., a malformed file name).
INVALID_ARGUMENT = 3; सार्वजनिक स्थैतिक अंतिम कोड NOT_FOUND
Some requested entity (e.g., file or directory) was not found. For privacy reasons, this code *may* be returned when the client does not have the access right to the entity.
NOT_FOUND = 5; सार्वजनिक स्थैतिक अंतिम कोड ठीक है
Not an error; returned on success
OK = 0; सार्वजनिक स्थैतिक अंतिम कोड OUT_OF_RANGE
Operation tried to iterate past the valid input range. E.g., seeking or reading past end of file. Unlike INVALID_ARGUMENT, this error indicates a problem that may be fixed if the system state changes. For example, a 32-bit file system will generate INVALID_ARGUMENT if asked to read at an offset that is not in the range [0,2^32-1], but it will generate OUT_OF_RANGE if asked to read from an offset past the current file size. There is a fair bit of overlap between FAILED_PRECONDITION and OUT_OF_RANGE. We recommend using OUT_OF_RANGE (the more specific error) when it applies so that callers who are iterating through a space can easily look for an OUT_OF_RANGE error to detect when they are done.
OUT_OF_RANGE = 11; सार्वजनिक स्थैतिक अंतिम कोड PERMISSION_DENIED
The caller does not have permission to execute the specified operation. PERMISSION_DENIED must not be used for rejections caused by exhausting some resource (use RESOURCE_EXHAUSTED instead for those errors). PERMISSION_DENIED must not be used if the caller can not be identified (use UNAUTHENTICATED instead for those errors).
PERMISSION_DENIED = 7; सार्वजनिक स्थैतिक अंतिम कोड RESOURCE_EXHAUSTED
Some resource has been exhausted, perhaps a per-user quota, or perhaps the entire file system is out of space.
RESOURCE_EXHAUSTED = 8; सार्वजनिक स्थैतिक अंतिम कोड अप्रमाणित
The request does not have valid authentication credentials for the operation.
UNAUTHENTICATED = 16; सार्वजनिक स्थैतिक अंतिम कोड अनुपलब्ध
The service is currently unavailable. This is a most likely a transient condition and may be corrected by retrying with a backoff. See litmus test above for deciding between FAILED_PRECONDITION, ABORTED, and UNAVAILABLE.
UNAVAILABLE = 14; सार्वजनिक स्थैतिक अंतिम कोड लागू नहीं किया गया
Operation is not implemented or not supported/enabled in this service.
UNIMPLEMENTED = 12; सार्वजनिक स्थैतिक अंतिम कोड अज्ञात
Unknown error. An example of where this error may be returned is if a Status value received from another address space belongs to an error-space that is not known in this address space. Also errors raised by APIs that do not return enough error information may be converted to this error.
UNKNOWN = 2; सार्वजनिक स्थैतिक अंतिम कोड अपरिचित
स्थिरांक
सार्वजनिक स्थैतिक अंतिम पूर्णांक ABORTED_VALUE
The operation was aborted, typically due to a concurrency issue like sequencer check failures, transaction aborts, etc. See litmus test above for deciding between FAILED_PRECONDITION, ABORTED, and UNAVAILABLE.
ABORTED = 10; स्थिर मान: 10
सार्वजनिक स्थैतिक अंतिम पूर्णांक ALREADY_EXISTS_VALUE
Some entity that we attempted to create (e.g., file or directory) already exists.
ALREADY_EXISTS = 6; स्थिर मान: 6
सार्वजनिक स्थैतिक अंतिम पूर्णांक CANCELLED_VALUE
The operation was cancelled (typically by the caller).
CANCELLED = 1; स्थिर मान: 1
सार्वजनिक स्थैतिक अंतिम पूर्णांक DATA_LOSS_VALUE
Unrecoverable data loss or corruption.
DATA_LOSS = 15; स्थिर मान: 15
सार्वजनिक स्थैतिक अंतिम पूर्णांक DEADLINE_EXCEEDED_VALUE
Deadline expired before operation could complete. For operations that change the state of the system, this error may be returned even if the operation has completed successfully. For example, a successful response from a server could have been delayed long enough for the deadline to expire.
DEADLINE_EXCEEDED = 4; स्थिर मान: 4
सार्वजनिक स्थैतिक अंतिम पूर्णांक DO_NOT_USE_RESERVED_FOR_FUTURE_EXPANSION_USE_DEFAULT_IN_SWITCH_INSTEAD__VALUE
An extra enum entry to prevent people from writing code that fails to compile when a new code is added. Nobody should ever reference this enumeration entry. In particular, if you write C++ code that switches on this enumeration, add a default: case instead of a case that mentions this enumeration entry. Nobody should rely on the value (currently 20) listed here. It may change in the future.
DO_NOT_USE_RESERVED_FOR_FUTURE_EXPANSION_USE_DEFAULT_IN_SWITCH_INSTEAD_ = 20; स्थिर मान: 20
सार्वजनिक स्थैतिक अंतिम पूर्णांक FAILED_PRECONDITION_VALUE
Operation was rejected because the system is not in a state
required for the operation's execution. For example, directory
to be deleted may be non-empty, an rmdir operation is applied to
a non-directory, etc.
A litmus test that may help a service implementor in deciding
between FAILED_PRECONDITION, ABORTED, and UNAVAILABLE:
(a) Use UNAVAILABLE if the client can retry just the failing call.
(b) Use ABORTED if the client should retry at a higher-level
(e.g., restarting a read-modify-write sequence).
(c) Use FAILED_PRECONDITION if the client should not retry until
the system state has been explicitly fixed. E.g., if an "rmdir"
fails because the directory is non-empty, FAILED_PRECONDITION
should be returned since the client should not retry unless
they have first fixed up the directory by deleting files from it.
(d) Use FAILED_PRECONDITION if the client performs conditional
REST Get/Update/Delete on a resource and the resource on the
server does not match the condition. E.g., conflicting
read-modify-write on the same resource.
FAILED_PRECONDITION = 9; स्थिर मान: 9
सार्वजनिक स्थैतिक अंतिम पूर्णांक INTERNAL_VALUE
Internal errors. Means some invariant expected by the underlying system has been broken. If you see one of these errors, something is very broken.
INTERNAL = 13; स्थिर मान: 13
सार्वजनिक स्थैतिक अंतिम पूर्णांक INVALID_ARGUMENT_VALUE
Client specified an invalid argument. Note that this differs from FAILED_PRECONDITION. INVALID_ARGUMENT indicates arguments that are problematic regardless of the state of the system (e.g., a malformed file name).
INVALID_ARGUMENT = 3; स्थिर मान: 3
सार्वजनिक स्थैतिक अंतिम पूर्णांक NOT_FOUND_VALUE
Some requested entity (e.g., file or directory) was not found. For privacy reasons, this code *may* be returned when the client does not have the access right to the entity.
NOT_FOUND = 5; स्थिर मान: 5
सार्वजनिक स्थैतिक अंतिम पूर्णांक OK_VALUE
Not an error; returned on success
OK = 0; स्थिर मान: 0
सार्वजनिक स्थैतिक अंतिम पूर्णांक OUT_OF_RANGE_VALUE
Operation tried to iterate past the valid input range. E.g., seeking or reading past end of file. Unlike INVALID_ARGUMENT, this error indicates a problem that may be fixed if the system state changes. For example, a 32-bit file system will generate INVALID_ARGUMENT if asked to read at an offset that is not in the range [0,2^32-1], but it will generate OUT_OF_RANGE if asked to read from an offset past the current file size. There is a fair bit of overlap between FAILED_PRECONDITION and OUT_OF_RANGE. We recommend using OUT_OF_RANGE (the more specific error) when it applies so that callers who are iterating through a space can easily look for an OUT_OF_RANGE error to detect when they are done.
OUT_OF_RANGE = 11; स्थिर मान: 11
सार्वजनिक स्थैतिक अंतिम पूर्णांक PERMISSION_DENIED_VALUE
The caller does not have permission to execute the specified operation. PERMISSION_DENIED must not be used for rejections caused by exhausting some resource (use RESOURCE_EXHAUSTED instead for those errors). PERMISSION_DENIED must not be used if the caller can not be identified (use UNAUTHENTICATED instead for those errors).
PERMISSION_DENIED = 7; स्थिर मान: 7
सार्वजनिक स्थैतिक अंतिम int RESOURCE_EXHAUSTED_VALUE
Some resource has been exhausted, perhaps a per-user quota, or perhaps the entire file system is out of space.
RESOURCE_EXHAUSTED = 8; स्थिर मान: 8
सार्वजनिक स्थैतिक अंतिम पूर्णांक UNAUTHENTICATED_VALUE
The request does not have valid authentication credentials for the operation.
UNAUTHENTICATED = 16; स्थिर मान: 16
सार्वजनिक स्थैतिक अंतिम पूर्णांक UNAVAILABLE_VALUE
The service is currently unavailable. This is a most likely a transient condition and may be corrected by retrying with a backoff. See litmus test above for deciding between FAILED_PRECONDITION, ABORTED, and UNAVAILABLE.
UNAVAILABLE = 14; स्थिर मान: 14
सार्वजनिक स्थैतिक अंतिम पूर्णांक UNIMPLEMENTED_VALUE
Operation is not implemented or not supported/enabled in this service.
UNIMPLEMENTED = 12; स्थिर मान: 12
सार्वजनिक स्थैतिक अंतिम पूर्णांक UNKNOWN_VALUE
Unknown error. An example of where this error may be returned is if a Status value received from another address space belongs to an error-space that is not known in this address space. Also errors raised by APIs that do not return enough error information may be converted to this error.
UNKNOWN = 2; स्थिर मान: 2